Вот

[oracle@test-server ~]$ cat $ORACLE_HOME/network/admin/samples/listener.ora
# copyright (c) 1997 by the Oracle Corporation
#
# NAME
# listener.ora
# FUNCTION
# Network Listener startup parameter file example
# NOTES
# This file contains all the parameters for listener.ora,
# and could be used to configure the listener by uncommenting
# and changing values. Multiple listeners can be configured
# in one listener.ora, so listener.ora parameters take the form
# of SID_LIST_<lsnr>, where <lsnr> is the name of the listener
# this parameter refers to. All parameters and values are
# case-insensitive.

# <lsnr>
# This parameter specifies both the name of the listener, and
# it listening address(es). Other parameters for this listener
# us this name in place of <lsnr>. When not specified,
# the name for <lsnr> defaults to "LISTENER", with the default
# address value as shown below.
#
# LISTENER =
# (ADDRESS_LIST=
# (ADDRESS=(PROTOCOL=tcp)(HOST=localhost)(PORT=1521))
# (ADDRESS=(PROTOCOL=ipc)(KEY=PNPKEY)))

# SID_LIST_<lsnr>
# List of services the listener knows about and can connect
# clients to. There is no default. See the Net8 Administrator's
# Guide for more information.
#
# SID_LIST_LISTENER=
# (SID_LIST=
# (SID_DESC=
# #BEQUEATH CONFIG
# (GLOBAL_DBNAME=salesdb.mycompany)
# (SID_NAME=sid1)
# (ORACLE_HOME=/private/app/oracle/product/8.0.3)
# #PRESPAWN CONFIG
# (PRESPAWN_MAX=20)
# (PRESPAWN_LIST=
# (PRESPAWN_DESC=(PROTOCOL=tcp)(POOL_SIZE=2)(TIMEOUT=1))
# )
# )
# )

# PASSWORDS_<lsnr>
# Specifies a password to authenticate stopping the listener.
# Both encrypted and plain-text values can be set. Encrypted passwords
# can be set and stored using lsnrctl.
# LSNRCTL> change_password
# Will prompt for old and new passwords, and use encryption both
# to match the old password and to set the new one.
# LSNRCTL> set password
# Will prompt for the new password, for authentication with
# the listener. The password must be set before running the next
# command.
# LSNRCTL> save_config
# Will save the changed password to listener.ora. These last two
# steps are not necessary if SAVE_CONFIG_ON_STOP_<lsnr> is ON.
# See below.
#
# Default: NONE
#
# PASSWORDS_LISTENER = 20A22647832FB454 # "foobar"

# SAVE_CONFIG_ON_STOP_<lsnr>
# Tells the listener to save configuration changes to listener.ora when
# it shuts down. Changed parameter values will be written to the file,
# while preserving formatting and comments.
# Default: OFF
# Values: ON/OFF
#
# SAVE_CONFIG_ON_STOP_LISTENER = ON

# USE_PLUG_AND_PLAY_<lsnr>
# Tells the listener to contact an Onames server and register itself
# and its services with Onames.
# Values: ON/OFF
# Default: OFF
#
# USE_PLUG_AND_PLAY_LISTENER = ON

# LOG_FILE_<lsnr>
# Sets the name of the listener's log file. The .log extension
# is added automatically.
# Default=<lsnr>
#
# LOG_FILE_LISTENER = lsnr

# LOG_DIRECTORY_<lsnr>
# Sets the directory for the listener's log file.
# Default: <oracle_home>/network/log
#
# LOG_DIRECTORY_LISTENER = /private/app/oracle/product/8.0.3/network/log

# TRACE_LEVEL_<lsnr>
# Specifies desired tracing level.
# Default: OFF
# Values: OFF/USER/ADMIN/SUPPORT/0-16
#
# TRACE_LEVEL_LISTENER = SUPPORT

# TRACE_FILE_<lsnr>
# Sets the name of the listener's trace file. The .trc extension
# is added automatically.
# Default: <lsnr>
#
# TRACE_FILE_LISTENER = lsnr

# TRACE_DIRECTORY_<lsnr>
# Sets the directory for the listener's trace file.
# Default: <oracle_home>/network/trace
#
# TRACE_DIRECTORY_LISTENER=/private/app/oracle/product/8.0.3/network/trace
# CONNECT_TIMEOUT_<lsnr>
# Sets the number of seconds that the listener waits to get a
# valid database query after it has been started.
# Default: 10
#
# CONNECT_TIMEOUT_LISTENER=10

Короче СТОП..................листенера на месте нет!!!!!!, но он был полчаса назад. И теперь не удается подрубится к серваку. Ни хрена се!!!! Куда он пропал????

lsnrctl status

LSNRCTL for Linux: Version 10.2.0.4.0 - Production on 24-DEC-2009 20:10:37

Copyright (c) 1991, 2007, Oracle. All rights reserved.

Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
------------------------
Alias LISTENER
Version TNSLSNR for Linux: Version 10.2.0.4.0 - Production
Start Date 24-DEC-2009 20:09:12
Uptime 0 days 0 hr. 1 min. 25 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Log File /u01/app/oracle/product/10.2.0/db_1/network/log/listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=test-server)(PORT=1521)))
The listener supports no services
The command completed successfully

Лог файл большого размера

Подумалось... скажи плиз как его перезапустить???. У его создал по твоей рекомендаций

Вот lsnrctl status:

LSNRCTL for Linux: Version 10.2.0.4.0 - Production on 24-DEC-2009 21:11:58

Copyright (c) 1991, 2007, Oracle. All rights reserved.

Connecting to (ADDRESS=(PROTOCOL=TCP)(HOST=10.210.7.10)(PORT=1521))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
Linux Error: 111: Connection refused
[oracle@test-server ~]$ lsnrctl start

LSNRCTL for Linux: Version 10.2.0.4.0 - Production on 24-DEC-2009 21:12:06

Copyright (c) 1991, 2007, Oracle. All rights reserved.

Starting /u01/app/oracle/product/10.2.0/db_1/bin/tnslsnr: please wait...

TNSLSNR for Linux: Version 10.2.0.4.0 - Production
System parameter file is /u01/app/oracle/product/10.2.0/db_1/network/admin/listener.ora
Log messages written to /u01/app/oracle/product/10.2.0/db_1/network/log/listener.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=10.210.7.10)(PORT=1521)))

Connecting to (ADDRESS=(PROTOCOL=TCP)(HOST=10.210.7.10)(PORT=1521))
STATUS of the LISTENER
------------------------
Alias LISTENER
Version TNSLSNR for Linux: Version 10.2.0.4.0 - Production
Start Date 24-DEC-2009 21:12:06
Uptime 0 days 0 hr. 0 min. 0 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/oracle/product/10.2.0/db_1/network/admin/listener.ora
Listener Log File /u01/app/oracle/product/10.2.0/db_1/network/log/listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=10.210.7.10)(PORT=1521)))
Services Summary...
Service "archs" has 1 instance(s).
Instance "archs", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
[oracle@test-server ~]$ lsnrctl service

LSNRCTL for Linux: Version 10.2.0.4.0 - Production on 24-DEC-2009 21:14:10

Copyright (c) 1991, 2007, Oracle. All rights reserved.

Connecting to (ADDRESS=(PROTOCOL=TCP)(HOST=10.210.7.10)(PORT=1521))
Services Summary...
Service "archs" has 1 instance(s).
Instance "archs", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:2 refused:0
LOCAL SERVER
The command completed successfully

Точнее вот

[oracle@test-server ~]$ lsnrctl status

LSNRCTL for Linux: Version 10.2.0.4.0 - Production on 24-DEC-2009 21:15:45

Copyright (c) 1991, 2007, Oracle. All rights reserved.

Connecting to (ADDRESS=(PROTOCOL=TCP)(HOST=10.210.7.10)(PORT=1521))
STATUS of the LISTENER
------------------------
Alias LISTENER
Version TNSLSNR for Linux: Version 10.2.0.4.0 - Production
Start Date 24-DEC-2009 21:12:06
Uptime 0 days 0 hr. 3 min. 38 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/oracle/product/10.2.0/db_1/network/admin/listener.ora
Listener Log File /u01/app/oracle/product/10.2.0/db_1/network/log/listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=10.210.7.10)(PORT=1521)))
Services Summary...
Service "archs" has 1 instance(s).
Instance "archs", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully

Ура!!! Все ОК.
Веб открылся. Но Вот он мне пишет на странице типа листенер не запустился:

Status Failed

Details ORA-12541: TNS:no listener (DBD ERROR: OCIServerAttach

Подумалось... Что посоветуешь?

https://10.210.7.10:1158/em вот так открылся, а не через https://test-server:1158/em

Все нормально. В файле hosts добавил: 10.210.7.10 test-server и пришло счастье небольшое
В Веб интерфейсе ссылка "Monitor in Memory Access Mode" открывается, далее регистрация проходит успешно, далее в какую ссылку не щелни он выкидывает на главную страницу, а там он говорит


Listener

Status Down
Host test-server
Port 1521
Name LISTENER
Oracle Home /u01/app/oracle/product/10.2.0/db_1
Location /u01/app/oracle/product/10.2.0/db_1/network/admin
Details TNS-12541: TNS:no listener
---------------------------------------------------------------
Результат lsnrctl status

lsnrctl status

LSNRCTL for Linux: Version 10.2.0.4.0 - Production on 25-DEC-2009 09:38:10

Copyright (c) 1991, 2007, Oracle. All rights reserved.

Connecting to (ADDRESS=(PROTOCOL=TCP)(HOST=10.210.7.10)(PORT=1521))
STATUS of the LISTENER
------------------------
Alias LISTENER
Version TNSLSNR for Linux: Version 10.2.0.4.0 - Production
Start Date 24-DEC-2009 21:45:17
Uptime 0 days 11 hr. 52 min. 52 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/oracle/product/10.2.0/db_1/network/admin/listener.ora
Listener Log File /u01/app/oracle/product/10.2.0/db_1/network/log/listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=10.210.7.10)(PORT=1521)))
Services Summary...
Service "archs" has 1 instance(s).
Instance "archs", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
------------------------------------------------------------
Файл listener.ora

# listener.ora Network Configuration File: /u01/app/oracle/product/10.2.0/db_1/network/admin/ # listener.ora
# Generated by Oracle configuration tools.

LISTENER =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.210.7.10)(PORT = 1521))
)

SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = archs)
(ORACLE_HOME = /u01/app/oracle/product/10.2.0/db_1)

)
)
---------------------------------------------

Ну что друзья где в этой каше я дурак?

Скрин

В общем Подумалось..........извини конечно, но..........ты просто КРАСАВА!!!!!!
Изменил листенер и все пошло!!!!!!!
блин как бы была жизнь начинающих, без професионалов!!!!!!
Спасибо за советы!!!!