Привет всем!! У меня вопрос общего характера по Sambe и по LAN вообще… для затравки, немного предыстории. Так вот, решили мы создать домашнею локальную сеть, протянули пару километров кабеля, расшарили ресурсы, запустили пару игровых серверов, в общем как везде. Так как страна у нас не богатая (к слову, средний заработок всего 80 гринов) было решено в сервак воткнуть еще две сетевухи (благо по оказии нагребли этого хлама) и с экономить на свиче. Но как вы уже догадались возникли проблемы другого характера… На серваке установлен RH 9.0, samba Version 2.2.7a, Linux 2.4.24. Рад буду любому совету! А пока конкретные грабли. Из разных сетей невозможно зайти на шару по имени компа только по IP. Что делать, все что знал перепробовал.

eth0 Link encap:Ethernet HWaddr 00:60:97:20:F4:56
inet addr:192.168.70.1 Bcast:192.168.70.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:21153737 errors:0 dropped:0 overruns:0 frame:0
TX packets:32725724 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1823317099 (1738.8 Mb) TX bytes:2863522721 (2730.8 Mb)
Interrupt:10 Base address:0x1000

eth1 Link encap:Ethernet HWaddr 00:60:97:20:F4:0B
inet addr:192.168.64.254 Bcast:192.168.64.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:4836383 errors:0 dropped:0 overruns:0 frame:0
TX packets:7180776 errors:0 dropped:0 overruns:0 carrier:109
collisions:0 txqueuelen:1000
RX bytes:2227454501 (2124.2 Mb) TX bytes:3523557012 (3360.3 Mb)
Interrupt:5 Base address:0x1040

eth2 Link encap:Ethernet HWaddr 00:60:97:2D:3F:DB
inet addr:192.168.71.254 Bcast:192.168.71.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1119464 errors:0 dropped:0 overruns:0 frame:0
TX packets:1875447 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:111746614 (106.5 Mb) TX bytes:2614261312 (2493.1 Mb)
Interrupt:9 Base address:0x1080

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:49930 errors:0 dropped:0 overruns:0 frame:0
TX packets:49930 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:3938872 (3.7 Mb) TX bytes:3938872 (3.7 Mb)

и часть конфига самбы...

# workgroup = NT-Domain-Name or Workgroup-Name
workgroup = Freenet

# server string is the equivalent of the NT Description field
server string = Server

hosts allow = 127. 192.168.70. 192.168.71. 192.168.72. 192.168.64.

# Configure Samba to use multiple interfaces
# If you have multiple network interfaces then you must list them
# here. See the man page for details.
; interfaces = 192.168.12.2/24 192.168.13.2/24
interface = 192.168.64.254/24 192.168.71.254/24 192.168.70.1/24 192.168.72.254/24

# Browser Control Options:
# set local master to no if you don't want Samba to become a master
# browser on your network. Otherwise the normal election rules apply
local master = yes

# OS Level determines the precedence of this server in master browser
# elections. The default value should be reasonable
os level = 70

# Domain Master specifies Samba to be the Domain Master Browser. This
# allows Samba to collate browse lists between subnets. Don't use this
# if you already have a Windows NT domain controller doing this job
domain master = yes

# Preferred Master causes Samba to force a local browser election on startup
# and gives it a slightly higher chance of winning the election
# preferred master = yes

# Enable this if you want Samba to be a domain logon server for
# Windows95 workstations.
# domain logons = yes

# if you enable domain logons then you may want a per-machine or
# per user logon script
# run a specific logon batch file per workstation (machine)
; logon script = %m.bat
# run a specific logon batch file per username
; logon script = %U.bat

# Where to store roving profiles (only for Win95 and WinNT)
# %L substitutes for this servers netbios name, %U is username
# You must uncomment the [Profiles] share below
; logon path = \\%L\Profiles\%U

# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable it's WINS Server
wins support = yes

# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
# wins server = no

# WINS Proxy - Tells Samba to answer name resolution queries on
# behalf of a non WINS capable client, for this to work there must be
# at least one WINS Server on the network. The default is NO.
wins proxy = no

# DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names
# via DNS nslookups. The built-in default for versions 1.9.17 is yes,
# this has been changed in version 1.9.18 to no.
# dns proxy = yes

# Case Preservation can be handy - system default is _no_
# NOTE: These can be set on a per share basis
; preserve case = no
; short preserve case = no
# Default case is normally upper case for all DOS files
; default case = lower
# Be very careful with case sensitivity - it can break things!
; case sensitive = no