нашел pdf по установке adapteca на vmWare прошу обьясните где взять два .vib файла ? я их не нашел точнее нашел только один .
Use the following procedure to install the . vib files for a VMware ESX 4.1 system only . The installation
can be done on an ESX 4.1 console or from a remote system running a T elnet/SSH client.
1. Insert the Adaptec Installation DVD.
2. Mount the Adaptec Installation DVD.
3. Copy the following files to your local ESX 4.1 /tmp directory:
• vmware-esx-provider-arcconf . vib
• vmware-esx-provider-arcsmis.vib
The arcconf . vib is for command line communication.
The arcsmis.vib is for remote management communication.
4. Stop operations.
/etc/init.d/./sfcbd-watchdog stop
5. Check for an existing installation of arcconf .
esxupdate --vib-view query | grep arcconf
6. Remove the existing installation of arcconf .
esxupdate -b < arcconf module name > --maintenancemode remove
When the package is removed, you receive the message "The update completed successfully , but
the system needs to be rebooted for the changes to be effective".
7. Check for an existing installation of arcsmis.
esxupdate --vib-view query | grep arcsmis
8. Remove the existing installation of arcsmis.
esxupdate -b < arcsmis module name > --maintenancemode remove
When the package is removed, you receive the message "The update completed successfully , but
the system needs to be rebooted for the changes to be effective."
9. Reboot the system.
10. Stop operations.
/etc/init.d/./sfcbd-watchdog stop
11. Install the arcconf package.
esxupdate -b /tmp/vmware-esx-provider-arcconf.vib --nodeps --nosigcheck
--maintenancemode update
When the package is installed, you receive the message "The update completed successfully , but
the system needs to be rebooted for the changes to be effective."
12. Install the arcsmis package.
esxupdate -b /tmp/vmware-esx-provider-arcsmis.vib --nodeps --nosigcheck
--maintenancemode update
When the package is installed, you receive the message "The update completed successfully , but
the system needs to be rebooted for the changes to be effective."
13. Reboot the system.

а нет извиняюсь вот нужная
Installing on VMware ESXi 5.x
Use the following procedure to install the . vib files for a VMware ESXi 5.x system only . The installation
must be done from a remote system running a T elnet/SSH client. Use a terminal emulator to access the
ESXi 5.x server remotely .
1. Insert the Adaptec Installation DVD.
2. Mount the Adaptec Installation DVD.
3. Copy the following files to your local ESXi 5.x /tmp directory:
• vmware-esx-provider-arcconf . vib
• vmware-esx-provider-arcsmis.vib
The arcconf . vib is for command line communication.
The arcsmis.vib is for remote management communication.
4. Stop operations.
/etc/init.d/./sfcbd-watchdog stop
5. Check for existing installation of arcconf .
esxcli software vib list | grep arcconf
6. Remove the existing arcconf package.
esxcli software vib remove -n arcconf
When the package is removed, you receive the message "Reboot Required: false."
7. Check for an existing installation of arcsmis.
esxcli software vib list | grep arcsmis
8. Remove the existing arcsmis package.
esxcli software vib remove -n arcsmis
When the package is removed, you receive the message "Reboot Required: false."
9. Set the acceptance level if this is the first installation of arcconf and arcsmis:
esxcli software acceptance set –-level=CommunitySupported
10. Install the arcconf package.
esxcli software vib install --maintenance-mode --no-sig-check -v
/tmp/vmware-esx-provider-arcconf.vib
When the package is installed, you receive the message "Reboot Required: false."
11. Install the arcsmis package.
esxcli software vib install --maintenance-mode --no-sig-check -v
/tmp/vmware-esx-provider-arcsmis.vib
When the package is installed, you receive the message "Reboot Required: false."
12. Reboot the system.

Scott Tiger,

Прошу прощения уже нашел , но теперь проблема следующая нужна с помощью программы кешмакс сделать из двух ссд дисков кеш для 5го рейда из 5 хдд по 3 тб