>> Automatic Polling is enabled
>> Automatic ATS Generation is disabled
>> 500ms
>> Detect Felica 424K Card enabled
>> Detect Felica 212K Card disabled
>> DDetect Topaz Card disabled
>> Detect ISO14443 Type B Card disabled
>> DDetect ISO14443 Type A Card disabled

String lastDeviceChoice;
        PropFile pf = new PropFile();
        lastDeviceChoice = pf.getValueStr("device.lastChoice","ACS ACR122 0");


        // System.out.println("Hello!");


        // show the list of available terminals
        TerminalFactory factory = TerminalFactory.getDefault();
        List<CardTerminal> terminals = factory.terminals().list();
        System.out.println("Terminals: " + terminals);


        // get the first terminal
        CardTerminal terminal = terminals.get(0);
        // establish a connection with the card
        Card card = terminal.connect("*");
        System.out.println("card: " + card);
        CardChannel channel = card.getBasicChannel();

        ResponseAPDU response = channel.transmit(new CommandAPDU(new byte[] { (byte) 0xFF, (byte) 0xCA, (byte) 0x00, (byte) 0x00, (byte) 0x00 }));
       // ResponseAPDU response = channel.transmit(new CommandAPDU(new byte[] { (byte) 0x01, (byte) 0x01, (byte) 0x5F, (byte) 0x1F }));
        System.out.println("Response: " + response.toString());
        System.out.println("Response: " +response.getData().toString());

        if (response.getSW1() == 0x63 && response.getSW2() == 0x00)  System.out.println("Failed");

        System.out.println("UID: " + bin2hex(response.getData()));


        // disconnect
        card.disconnect(false);

Terminals: [PC/SC terminal ACS ACR122 0]
card: PC/SC card in ACS ACR122 0, protocol T=1, state OK
Response: ResponseAPDU: 6 bytes, SW=9000
Response: [B@65fea7
UID: A5F6BE39