Извините за назойливость, но есть еще одна проблема. Открываю этот файл Аксессом-2000, он говорит, что файл создан Аксессом 97 и после преобразования будет недоступен. Что сделать? Поставить Аксесс 97? Или (если это возможно) просто сохранить в формате Аксесс-97?

2 Shuhard.
Собственно, Canon и не выпустил дрова для W2k для этой модели. Мы обращались в Canon непосредственно, и вот что нам ответили инженеры:

Using MultiPASS under Windows 2000
This is not a guaranteed solution

Canon MultiPASS L60

[=============================
Contents
1. Preparing for installing
2. Installing the MultiPASS L6000 Desktop Software
3. Install Scangear
4. Installing Printer driver
[============================

1. Preparing for installing

There is no MultiPASS software for the MultiPASS L60
However installing the MultiPASS L6000 Windows 2000 software does work.

Download the MultiPASS L6000 software
[============================

2. Installing the v3.01 Desktop Manager for Windows 2000 used for the MultiPASS L6000

Download the MultiPASS L6000 software

Run the downloaded MultiPASS L6000 software

It will extract the installation software normally to C:\TEMP\L6000

You will need to find 3 files
MPMASTER.INI
MODEL.INI
MPASSDTM\Disk1\MODEL.INI

Both MODEL.INI must have the model key changed

Before (MutiPASS L6000)
[Install]
Model Key=H1


After (MultiPASS L60)
[Install]
Model Key=H2


If the files will not save, simply right click on each file and uncheck
the READ ONLY box and Apply

You will need to install the MPL6000 software completely first to allow the
printer driver to install correctly prior to the next step.

Some errors will occur at time of the automatic printer driver installation
i.e. DELETEFILE: ERROR and COPYFILEACCESS driver.

The printer driver may or may not install at this time.

[==========================

3. ScanGear Software

An error will occur when Scangear is used. We need to make some changes in the REGISTRY.

Run \WINNT\system32\regedt32.exe

Find SCANGEAR under HKEY_LOCAL_MACHINE
Edit the following

Any editing is at your risk.

HKEY_LOCAL_MACHINE\Software\Canon Information Systems\ScanGear Devices\MultiPASS L6000

Edit the Sub key of ProductID from MultiPASS-LG to MultiPASS-BP1

HKEY_LOCAL_MACHINE\Software\Canon Information Systems\ScanGear Devices\MultiPASS L6000

MultiPASS L60: Edit the Sub key of TabNames from L6000 to L60

HKEY_LOCAL_MACHINE\Software\Canon Information Systems\ScanGear\MultiPASS L6000

MultiPASS L60: Edit the Sub key of ProductName from MultiPASS-L6000 to MultiPASS-L60

***** Do NOT edit DeviceName ****

[=================

4. Print Driver

Use the MultiPASS L6000 driver, you can rename it later to MultiPASS L60 in
the printers folder

[===================

5. Problems

Not reported

This file updated January 6 2000