Доброе утро!
Поскажите , пожалуйста.Не могу заставить, чтобы работало.
Wed Apr 21 08:32:16 2010

08:32:16 DR: DRAUTO is 0 (Off)
08:32:16 Informix Dynamic Server Version 7.31.TC2 Software Serial Number ACN#A313826
08:32:18 Informix Dynamic Server Initialized -- Shared Memory Initialized.
08:32:18 Physical Recovery Started.
08:32:18 Physical Recovery Complete: 464 Pages Restored.
08:32:18 Logical Recovery Started.
08:32:21 Waiting for Next Logical Log File to be Freed
08:33:11 (5) connection rejected - no calls allowed for sqlexec
08:33:11 listener-thread: err = -27002: oserr = 0: errstr = : No connections are allowed in Dynamic Server

#**************************************************************************
#
# INFORMIX SOFTWARE, INC.
#
# Title: onconfig.std
# Description: Informix Dynamic Server Configuration Parameters
#
#**************************************************************************

# Root Dbspace Configuration

ROOTNAME rootdbs # Root dbspace name
ROOTPATH D:\IFMXDATA\ol_kamil\rootdbs_dat.000 # Path for device containing root dbspace
ROOTOFFSET 0 # Offset of root dbspace into device (Kbytes)
ROOTSIZE 30720 # Size of root dbspace (Kbytes)

# Disk Mirroring Configuration Parameters

MIRROR 1 # Mirroring flag (Yes = 1, No = 0)
MIRRORPATH C:\IFMXDATA\ol_kamil\rootdbs_mirr.000 # Path for device containing mirrored root
MIRROROFFSET 0 # Offset into mirrored device (Kbytes)

# Physical Log Configuration

PHYSDBS rootdbs # Location (dbspace) of physical log
PHYSFILE 4000 # Physical log file size (Kbytes)

# Logical Log Configuration

LOGFILES 10 # Number of logical log files
LOGSIZE 500 # Logical log size (Kbytes)
LOG_BACKUP_MODE MANUAL # Logical log backup mode (MANUAL, CONT)

# Diagnostics

MSGPATH D:\Informix\ol_kamil.log # System message log file path
CONSOLE D:\Informix\conol_kamil.log # System console message path
ALARMPROGRAM # Alarm program path

# System Diagnostic Script.
# SYSALARMPROGRAM - Full path of the system diagnostic script (e.g.
# c:\informix\etc\evidence.bat.) Set this parameter
# if you want a different Diagnostic Script than
# {INFORMIXDIR}\etc\evidence.bat, which is default.

# System Archive Tape Device

TAPEDEV NUL # Tape device path
TAPEBLK 16 # Tape block size (Kbytes)
TAPESIZE 10240 # Maximum amount of data to put on tape (Kbytes)

# Log Archive Tape Device

LTAPEDEV dev/null # Log tape device path
LTAPEBLK 16 # Log tape block size (Kbytes)
LTAPESIZE 20480 # Max amount of data to put on log tape (Kbytes)no
#NOFUZZYCKPT 1
DYMANIC_LOGS 2
# Optical

STAGEBLOB # Informix Dynamic Server/Optical staging area
OPTICAL_LIB_PATH # Location of Optical Subsystem driver DLL

# System Configuration

SERVERNUM 0 # Unique id corresponding to a server instance
stance
DBSERVERNAME ol_kamil # Name of default Dynamic Server
DBSERVERALIASES # List of alternate dbservernames
NETTYPE onsoctcp,1,,NET # Override sqlhosts nettype parameters
DEADLOCK_TIMEOUT 60 # Max time to wait of lock in distributed env.
RESIDENT 0 # Forced residency flag (Yes = 1, No = 0)

MULTIPROCESSOR 0 # 0 for single-processor, 1 for multi-processor
NUMCPUVPS 1 # Number of user (cpu) vps
SINGLE_CPU_VP 0 # If non-zero, limit number of cpu vps to one

NOAGE 0 # Process aging
AFF_SPROC 0 # Affinity start processor
AFF_NPROCS 0 # Affinity number of processors

# Shared Memory Parameters

LOCKS 32000 # Maximum number of locks
BUFFERS 64000 # Maximum number of shared buffers
NUMAIOVPS 1 # Number of IO vps
PHYSBUFF 32 # Physical log buffer size (Kbytes)
LOGBUFF 32 # Logical log buffer size (Kbytes)
LOGSMAX 30 # Maximum number of logical log files
CLEANERS 1 # Number of buffer cleaner processes
SHMBASE 0xC000000L # Shared memory base address
SHMVIRTSIZE 8192 # initial virtual shared memory segment size
SHMADD 8192 # Size of new shared memory segments (Kbytes)
SHMTOTAL 0 # Total shared memory (Kbytes). 0=>unlimited
CKPTINTVL 300 # Check point interval (in sec)
LRUS 8 # Number of LRU queues
LRU_MAX_DIRTY 60 # LRU percent dirty begin cleaning limit
LRU_MIN_DIRTY 50 # LRU percent dirty end cleaning limit
LTXHWM 50 # Long transaction high water mark percentage
LTXEHWM 60 # Long transaction high water mark (exclusive)
TXTIMEOUT 300 # Transaction timeout (in sec)
STACKSIZE 32 # Stack size (Kbytes)

# System Page Size
# BUFFSIZE - Dynamic Server no longer supports this configuration parameter.
# To determine the page size used by Dynamic Server on your platform
# see the last line of output from the command, 'onstat -b'.


# Recovery Variables
# OFF_RECVRY_THREADS:
# Number of parallel worker threads during fast recovery or an offline restore.
# ON_RECVRY_THREADS:
# Number of parallel worker threads during an online restore.

OFF_RECVRY_THREADS 10 # Default number of offline worker threads
ON_RECVRY_THREADS 1 # Default number of online worker threads

# Data Replication Variables
# DRAUTO: 0 manual, 1 retain type, 2 reverse type
DRAUTO 0 # DR automatic switchover
DRINTERVAL 30 # DR max time between DR buffer flushes (in sec)
DRTIMEOUT 30 # DR network timeout (in sec)
DRLOSTFOUND \tmp # DR lost+found file path

# CDR Variables
CDR_LOGBUFFERS 2048 # size of log reading buffer pool (Kbytes)
CDR_EVALTHREADS 1,2 # evaluator threads (per-cpu-vp,additional)
CDR_DSLOCKWAIT 5 # DS lockwait timeout (seconds)
CDR_QUEUEMEM 4096 # Maximum amount of memory for any CDR queue (Kbytes)
CDR_LOGDELTA 30 # % of log space allowed in queue memory
CDR_NUMCONNECT 16 # Expected connections per server
CDR_NIFRETRY 300 # Connection retry (seconds)
CDR_NIFCOMPRESS 0 # Link level compression (-1 never, 0 none, 9 max)

# Backup/Restore variables
BAR_ACT_LOG D:\Informix\bar_ol_kamil.log #Path of log file for onbar.exe
BAR_MAX_BACKUP 1
BAR_RETRY 1
BAR_NB_XPORT_COUNT 10
BAR_XFER_BUF_SIZE 15
BAR_BSALIB_PATH D:\ISM\2.20\bin\libbsa.dll # Location of ISM XBSA DLL

RESTARTABLE_RESTORE OFF #To support restartable restore..values on/off

# Informix Storage Manager variables
ISM_DATA_POOL ISMData
ISM_LOG_POOL ISMLogs

# Read Ahead Variables
RA_PAGES # Number of pages to attempt to read ahead
RA_THRESHOLD # Number of pages left before next group

# DBSPACETEMP:
# Dynamic Server equivalent of DBTEMP for SE. This is the list of dbspaces
# that the Dynamic Server SQL Engine will use to create temp tables etc.
# If specified it must be a colon separated list of dbspaces that exist
# when the Dynamic Server system is brought online. If not specified, or if
# all dbspaces specified are invalid, various ad hoc queries will create
# temporary files in /tmp instead.

DBSPACETEMP cstemp # Default temp dbspaces

# DUMP*:
# The following parameters control the type of diagnostics information which
# is preserved when an unanticipated error condition (assertion failure) occurs
# during Dynamic Server operations.
# For DUMPSHMEM, DUMPGCORE and DUMPCORE 1 means Yes, 0 means No.

DUMPDIR \tmp # Preserve diagnostics in this directory
DUMPSHMEM 1 # Dump a copy of shared memory
DUMPGCORE 0 # Dump a core image using 'gcore'
DUMPCORE 0 # Dump a core image (Warning:this aborts Dynamic
Server)
DUMPCNT 1 # Number of shared memory or gcore dumps for
# a single user's session

FILLFACTOR 90 # Fill factor for building indexes

# method for Dynamic Server to use when determining current time
USEOSTIME 0 # 0: use internal time(fast), 1: get time from OS(slow)

# Parallel Database Queries (pdq)
MAX_PDQPRIORITY 100 # Maximum allowed pdqpriority
DS_MAX_QUERIES 32 # Maximum number of decision support queries
DS_TOTAL_MEMORY 4096 # Decision support memory (Kbytes)
DS_MAX_SCANS 1048576 # Maximum number of decision support scans
DATASKIP # List of dbspaces to skip

# OPTCOMPIND
# 0 => Nested loop joins will be preferred (where
# possible) over sortmerge joins and hash joins.
# 1 => If the transaction isolation mode is not
# "repeatable read", optimizer behaves as in (2)
# below. Otherwise it behaves as in (0) above.
# 2 => Use costs regardless of the transaction isolation
# mode. Nested loop joins are not necessarily
# preferred. Optimizer bases its decision purely
# on costs.
OPTCOMPIND 2 # To hint the optimizer

ONDBSPACEDOWN 2 # Dbspace down option: 0 = CONTINUE, 1 = ABORT, 2 = WAIT
LBU_PRESERVE 0 # Preserve last log for log backup
OPCACHEMAX 0 # Maximum optical cache size (Kbytes)

# HETERO_COMMIT (Gateway participation in distributed transactions)
# 1 => Heterogeneous Commit is enabled
# 0 (or any other value) => Heterogeneous Commit is disabled
HETERO_COMMIT 0

# Optimization goal: -1 = ALL_ROWS(Default), 0 = FIRST_ROWS
OPT_GOAL -1

# Optimizer DIRECTIVES ON (1/Default) or OFF (0)
DIRECTIVES 1

Andron,

Поставила
LTAPEDEV NUL
снова Waiting for Next Logical Log File to be Freed

АнатоЛой,

Да

Andron,

***Warning: Informix Dynamic Servrer no longer running

AndronУ вас параметр ALARMPROGRAM не установлен. Установите в него полный путь к скрипту no_log.sh (в винде у него вроде имя no_log.cmd или no_log.bat)

У меня файла с таким именем нет, а вот в events пишет Database Server: A Logical Logs Are Full alert occurred. Backup the logical logs.
Запускала ontape -a, начался backup. Потом No connections are allowed in Dynamic Server quiescent mode.

После restart server
online.log
Wed Apr 21 12:47:12 2010

12:47:12 DR: DRAUTO is 0 (Off)
12:47:17 Informix Dynamic Server Version 7.31.TC2 Software Serial Number ACN#A313826
12:47:19 Informix Dynamic Server Initialized -- Shared Memory Initialized.
12:47:19 Physical Recovery Started.
12:47:19 Physical Recovery Complete: 464 Pages Restored.
12:47:19 Logical Recovery Started.
12:47:24 Waiting for Next Logical Log File to be Freed

пробую войти в базу
12:48:49 (5) connection rejected - no calls allowed for sqlexec
12:48:49 listener-thread: err = -27002: oserr = 0: errstr = : No connections are allowed in Dynamic Server quiescent mode.

Заархивировать не получилось.
Всё тоже самое (((
сервер критичен и фирма с утра "стоит", но сервер ставила не я(это было аж 2004г), но сча с ним вынуждена разбиратся...
Спасибо всем!