я может глупый вещь скажу, тогда вы меня просто игнорируйте ;-) . Так вот, впервой слышу чтоб usb 1.1 было по определению не совместимо с 2.0 и наоборот

автор
You may have heard that USB 2.0 is "backward-compatible" with USB 1.0/1.1 (Full-Speed USB). While that's true, USB 1.1 is also forward-compatible with USB 2.0. Whenever a system has USB 2.0 ports, you'll find the "Enhanced" USB controller in Device Manager, but you will also find two other USB controllers.

These two to mantain backward compatibility to USB 1.1 devices. Each USB 2.0 host actually has 3 chips onboard. The USB controller routes signals to the correct controller chip depending on how a device is recognized. Where a device is physically plugged in has no bearing on how it is routed. All ports on a USB 2.0 motherboard can host any USB devices at all as long as the system and devices are healthy.

The vast majority of USB 2.0 devices will work on older PCs and Macs. None should flat-out fail unless there are other issues with the system. Hi-Speed USB devices will revert to Full-Speed operation when connected this way. Understand that Hi-Speed is at least ten times faster than Full-Speed in actual operation, so the speed difference is quite noticeable - unless you have never experienced Hi-Speed, of course. When it comes to USB hub compatibility between USB 2.0 and USB 1.1, here some facts:

* A powered hub is always preferable to unpowered.
* USB hub ports are not as capable or flexible as real PC ports so it's best not to expect the world of them.
* USB 1.1 (obsolete) hubs will work fine on USB 2.0 ports, but they cannot utilize USB 2.0 capabilities. They will default to slower speeds.
* Hi-Speed and Full/Low-Speed USB devices can coexist nicely on USB 2.0 hubs. Connecting such a hub to a USB 2.0 port is recommended.
* USB 2.0 hubs can be used on older USB 1.1 computers.
* Although it is said that you can "cascade" up to 4 hubs, problems may start to arise after two hubs, it's best to minimize hub usage if possible.
* Many USB devices don't work well on hubs. Cameras, scanners and especially USB drives are known to have problems with hub connectivity.
* Remember that "active USB extensions" are really just one-port hubs.


я бы потестил девайс на чистой инсталляции ХР (раз на висте он пашет) - если не заработает, нафиг его отдать и купить другой.