smartctl version  5 . 38  [x86_64-unknown-linux-gnu] Copyright (C)  2002 - 8  Bruce Allen
Home page is http://smartmontools.sourceforge.net/

=== START OF INFORMATION SECTION ===
Model Family:     Seagate Barracuda  7200 . 11 
Device Model:     ST31000340AS
Serial Number:    5QJ0NW29
Firmware Version: SD81
User Capacity:     1   000   204   886   016  bytes
Device is:        In smartctl database [for details use: -P show]
ATA Version is:    8 
ATA Standard is:  ATA- 8 -ACS revision  4 
Local Time is:    Tue Mar   8   15 : 42 : 20   2011  MSK
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
See vendor-specific Attribute list for marginal Attributes.

General SMART Values:
Offline data collection status:  (0x82) Offline data collection activity
                                        was completed without error.
                                        Auto Offline Data Collection: Enabled.
Self-test execution status:      (    0 ) The previous self-test routine completed
                                        without error or no self-test has ever
                                        been run.
Total time to complete Offline
data collection:                 (  650 ) seconds.
Offline data collection
capabilities:                    (0x7b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine
recommended polling time:        (    1 ) minutes.
Extended self-test routine
recommended polling time:        (  232 ) minutes.
Conveyance self-test routine
recommended polling time:        (    2 ) minutes.
SCT capabilities:              (0x103b) SCT Status supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.

SMART Attributes Data Structure revision number:  10 
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
   1  Raw_Read_Error_Rate     0x000f    117     093     006     Pre-fail  Always       -        139267845 
   3  Spin_Up_Time            0x0003    098     083     000     Pre-fail  Always       -        0 
   4  Start_Stop_Count        0x0032    099     099     020     Old_age   Always       -        1094 
   5  Reallocated_Sector_Ct   0x0033    100     100     036     Pre-fail  Always       -        1 
   7  Seek_Error_Rate         0x000f    056     053     030     Pre-fail  Always       -        2315191448637 
   9  Power_On_Hours          0x0032    084     084     000     Old_age   Always       -        14150 
  10  Spin_Retry_Count        0x0013    100     100     097     Pre-fail  Always       -        11 
  12  Power_Cycle_Count       0x0032    099     037     020     Old_age   Always       -        1045 
 184  Unknown_Attribute       0x0032    100     100     099     Old_age   Always       -        0 
 187  Reported_Uncorrect      0x0032    001     001     000     Old_age   Always       -        271 
 188  Unknown_Attribute       0x0032    100     098     000     Old_age   Always       -        4295032963 
 189  High_Fly_Writes         0x003a    001     001     000     Old_age   Always       -        901 
 190  Airflow_Temperature_Cel 0x0022    063     026     045     Old_age   Always   In_the_past  37  ( 172   243   37   36 )
 194  Temperature_Celsius     0x0022    037     074     000     Old_age   Always       -        37  ( 0   17   0   0 )
 195  Hardware_ECC_Recovered  0x001a    041     015     000     Old_age   Always       -        139267845 
 197  Current_Pending_Sector  0x0012    100     100     000     Old_age   Always       -        1 
 198  Offline_Uncorrectable   0x0010    100     100     000     Old_age   Offline      -        1 
 199  UDMA_CRC_Error_Count    0x003e    200     200     000     Old_age   Always       -        0 

SMART Error Log Version:  1 
ATA Error Count:  272  (device log contains only the most recent five errors)
        CR = Command Register [HEX]
        FR = Features Register [HEX]
        SC = Sector Count Register [HEX]
        SN = Sector Number Register [HEX]
        CL = Cylinder Low Register [HEX]
        CH = Cylinder High Register [HEX]
        DH = Device/Head Register [HEX]
        DC = Device Command Register [HEX]
        ER = Error register [HEX]
        ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after  49 . 710  days.

Error  272  occurred at disk power-on lifetime:  14148  hours ( 589  days +  12  hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
   40   51   00  1a  45  e8  01   Error: UNC at LBA = 0x01e8451a =  31999258 

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8  00   08  1a  45  e8 e1  00        00 : 20 : 16 . 438   READ DMA
   27   00   00   00   00   00  e0  00        00 : 20 : 16 . 437   READ NATIVE MAX ADDRESS EXT
  ec  00   00   00   00   00  a0  00        00 : 20 : 16 . 436   IDENTIFY DEVICE
  ef  03   46   00   00   00  a0  00        00 : 20 : 16 . 436   SET FEATURES [Set transfer mode]
   27   00   00   00   00   00  e0  00        00 : 20 : 16 . 435   READ NATIVE MAX ADDRESS EXT

Error  271  occurred at disk power-on lifetime:  14148  hours ( 589  days +  12  hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
   40   51   00  1a  45  e8  01   Error: UNC at LBA = 0x01e8451a =  31999258 

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8  00   08  1a  45  e8 e1  00        00 : 20 : 11 . 909   READ DMA
   27   00   00   00   00   00  e0  00        00 : 20 : 11 . 909   READ NATIVE MAX ADDRESS EXT
  ec  00   00   00   00   00  a0  00        00 : 20 : 11 . 908   IDENTIFY DEVICE
  ef  03   46   00   00   00  a0  00        00 : 20 : 11 . 907   SET FEATURES [Set transfer mode]
   27   00   00   00   00   00  e0  00        00 : 20 : 11 . 907   READ NATIVE MAX ADDRESS EXT

Error  270  occurred at disk power-on lifetime:  14148  hours ( 589  days +  12  hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
   40   51   00  1a  45  e8  01   Error: UNC at LBA = 0x01e8451a =  31999258 

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8  00   08  1a  45  e8 e1  00        00 : 20 : 06 . 776   READ DMA
   27   00   00   00   00   00  e0  00        00 : 20 : 06 . 775   READ NATIVE MAX ADDRESS EXT
  ec  00   00   00   00   00  a0  00        00 : 20 : 06 . 774   IDENTIFY DEVICE
  ef  03   46   00   00   00  a0  00        00 : 20 : 06 . 774   SET FEATURES [Set transfer mode]
   27   00   00   00   00   00  e0  00        00 : 20 : 06 . 773   READ NATIVE MAX ADDRESS EXT

Error  269  occurred at disk power-on lifetime:  14148  hours ( 589  days +  12  hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
   40   51   00  1a  45  e8  01   Error: UNC at LBA = 0x01e8451a =  31999258 

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8  00   08  1a  45  e8 e1  00        00 : 20 : 02 . 189   READ DMA
   27   00   00   00   00   00  e0  00        00 : 20 : 02 . 189   READ NATIVE MAX ADDRESS EXT
  ec  00   00   00   00   00  a0  00        00 : 20 : 02 . 188   IDENTIFY DEVICE
  ef  03   46   00   00   00  a0  00        00 : 20 : 02 . 187   SET FEATURES [Set transfer mode]
   27   00   00   00   00   00  e0  00        00 : 20 : 02 . 187   READ NATIVE MAX ADDRESS EXT

Error  268  occurred at disk power-on lifetime:  14148  hours ( 589  days +  12  hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
   40   51   00  1a  45  e8  01   Error: UNC at LBA = 0x01e8451a =  31999258 

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8  00   08  1a  45  e8 e1  00        00 : 19 : 57 . 583   READ DMA
   27   00   00   00   00   00  e0  00        00 : 19 : 57 . 583   READ NATIVE MAX ADDRESS EXT
  ec  00   00   00   00   00  a0  00        00 : 19 : 57 . 582   IDENTIFY DEVICE
  ef  03   46   00   00   00  a0  00        00 : 19 : 57 . 581   SET FEATURES [Set transfer mode]
   27   00   00   00   00   00  e0  00        00 : 19 : 57 . 581   READ NATIVE MAX ADDRESS EXT

SMART Self-test log structure revision number  1 
No self-tests have been logged.  [To run self-tests, use: smartctl -t]


SMART Selective self-test log data structure revision number  1 
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
     1          0          0   Not_testing
     2          0          0   Not_testing
     3          0          0   Not_testing
     4          0          0   Not_testing
     5          0          0   Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after  0  minute delay.

ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
user@host:~$ sudo smartctl  /dev/sda -a | grep fail
   1  Raw_Read_Error_Rate     0x002f    200     200     051     Pre-fail  Always       -        0 
   3  Spin_Up_Time            0x0027    184     162     021     Pre-fail  Always       -        5800 
   5  Reallocated_Sector_Ct   0x0033    200     200     140     Pre-fail  Always       -        0 
user@host:~$ sudo smartctl  /dev/sdb -a | grep fail
   1  Raw_Read_Error_Rate     0x000f    116     099     006     Pre-fail  Always       -        110622992 
   3  Spin_Up_Time            0x0003    100     100     000     Pre-fail  Always       -        0 
   5  Reallocated_Sector_Ct   0x0033    100     100     036     Pre-fail  Always       -        0 
   7  Seek_Error_Rate         0x000f    081     060     030     Pre-fail  Always       -        151457051 
  10  Spin_Retry_Count        0x0013    100     100     097     Pre-fail  Always       -        0 
user@host:~$ sudo smartctl  /dev/sdc -a | grep fail
   1  Raw_Read_Error_Rate     0x002f    100     100     051     Pre-fail  Always       -        757 
   3  Spin_Up_Time            0x0023    070     062     025     Pre-fail  Always       -        9171 
   5  Reallocated_Sector_Ct   0x0033    252     252     010     Pre-fail  Always       -        0 
user@host:~$ sudo smartctl  /dev/sdd -a | grep fail
   1  Raw_Read_Error_Rate     0x002f    100     100     051     Pre-fail  Always       -        6964 
   3  Spin_Up_Time            0x0023    070     061     025     Pre-fail  Always       -        9236 
   5  Reallocated_Sector_Ct   0x0033    252     252     010     Pre-fail  Always       -        0 
user@host:~$ sudo smartctl  /dev/sde -a | grep fail
   1  Raw_Read_Error_Rate     0x002f    200     200     051     Pre-fail  Always       -        0 
   3  Spin_Up_Time            0x0027    170     164     021     Pre-fail  Always       -        6491 
   5  Reallocated_Sector_Ct   0x0033    166     166     140     Pre-fail  Always       -        272 
user@host:~$ sudo smartctl  /dev/sdf -a | grep fail
   1  Raw_Read_Error_Rate     0x002f    200     200     051     Pre-fail  Always       -        0 
   3  Spin_Up_Time            0x0027    167     161     021     Pre-fail  Always       -        6641 
   5  Reallocated_Sector_Ct   0x0033    200     200     140     Pre-fail  Always       -        0 
^[[Auser@host:~$ sudo smartctl  /dev/sdh -a | grep fail
   1  Raw_Read_Error_Rate     0x000f    117     093     006     Pre-fail  Always       -        117539608 
   3  Spin_Up_Time            0x0003    098     083     000     Pre-fail  Always       -        0 
   5  Reallocated_Sector_Ct   0x0033    100     100     036     Pre-fail  Always       -        1 
   7  Seek_Error_Rate         0x000f    056     053     030     Pre-fail  Always       -        2315191448613 
  10  Spin_Retry_Count        0x0013    100     100     097     Pre-fail  Always       -        11 
user@host:~$ sudo smartctl  /dev/sdg -a | grep fail
   1  Raw_Read_Error_Rate     0x002f    200     200     051     Pre-fail  Always       -        0 
   3  Spin_Up_Time            0x0027    204     161     021     Pre-fail  Always       -        4800 
   5  Reallocated_Sector_Ct   0x0033    199     199     140     Pre-fail  Always       -        5 
user@host:~$ sudo smartctl  /dev/sdi -a | grep fail
   1  Raw_Read_Error_Rate     0x000f    106     099     006     Pre-fail  Always       -        10984159 
   3  Spin_Up_Time            0x0003    100     100     000     Pre-fail  Always       -        0 
   5  Reallocated_Sector_Ct   0x0033    100     100     036     Pre-fail  Always       -        0 
   7  Seek_Error_Rate         0x000f    078     060     030     Pre-fail  Always       -        60635971 
  10  Spin_Retry_Count        0x0013    100     100     097     Pre-fail  Always       -        0 
user@host:~$ sudo smartctl  /dev/sdj -a | grep fail
   1  Raw_Read_Error_Rate     0x002f    100     100     051     Pre-fail  Always       -        0 
   3  Spin_Up_Time            0x0023    075     074     025     Pre-fail  Always       -        7614 
   5  Reallocated_Sector_Ct   0x0033    252     252     010     Pre-fail  Always       -        0 
user@host:~$