machine  i386
cpu  I586_CPU
ident  router
maxusers  0 

options  IPFIREWALL
options  IPFIREWALL_VERBOSE
options  IPFIREWALL_VERBOSE_LIMIT= 100 
options  IPFIREWALL_FORWARD
options  IPDIVERT
options  DUMMYNET
options  MATH_EMULATE  #Support for x87 emulation
options  INET   #InterNETworking
options  FFS   #Berkeley Fast Filesystem
options  FFS_ROOT  #FFS usable as root device [keep this!]
options  SOFTUPDATES  #Enable FFS soft updates support
options  UFS_DIRHASH  #Improve performance on big directories
options  MFS   #Memory Filesystem
options  MD_ROOT   #MD is a potential root device
options  NFS   #Network Filesystem
options  NFS_ROOT  #NFS usable as root device, NFS required
options  MSDOSFS   #MSDOS Filesystem
options  CD9660   #ISO  9660  Filesystem
options  CD9660_ROOT  #CD-ROM usable as root, CD9660 required
options  PROCFS   #Process filesystem
options  COMPAT_43  #Compatible with BSD  4 . 3  [KEEP THIS!]
options  SCSI_DELAY= 15000  #Delay (in ms) before probing SCSI
options  UCONSOLE  #Allow users to grab the console
options  USERCONFIG  #boot -c editor
options  VISUAL_USERCONFIG #visual boot -c editor
options  KTRACE   #ktrace( 1 ) support
options  SYSVSHM   #SYSV-style shared memory
options  SYSVMSG   #SYSV-style message queues
options  SYSVSEM   #SYSV-style semaphores
options  P1003_1B  #Posix P1003_1B real-time extensions
options  _KPOSIX_PRIORITY_SCHEDULING
options  ICMP_BANDLIM  #Rate limit bad replies
options  KBD_INSTALL_CDEV # install a CDEV entry in /dev
options  AHC_REG_PRETTY_PRINT # Print register bitfields in debug
     # output.  Adds ~128k to driver.
options  AHD_REG_PRETTY_PRINT # Print register bitfields in debug 
     # output.  Adds ~215k to driver.

device  isa
device  eisa
device  pci

# Floppy drives
device  fdc0 at isa? port IO_FD1 irq  6  drq  2 
device  fd0 at fdc0 drive  0 
device  fd1 at fdc0 drive  1 

# ATA and ATAPI devices
device  ata0 at isa? port IO_WD1 irq  14 
device  ata1 at isa? port IO_WD2 irq  15 
device  ata
device  atadisk   # ATA disk drives
device  atapicd   # ATAPI CDROM drives
options  ATA_STATIC_ID  #Static device numbering

# SCSI peripherals
device  scbus  # SCSI bus (required)
device  da  # Direct Access (disks)
device  sa  # Sequential Access (tape etc)
device  cd  # CD
device  pass  # Passthrough device (direct SCSI access)

# atkbdc0 controls both the keyboard and the PS/ 2  mouse
device  atkbdc0 at isa? port IO_KBD
device  atkbd0 at atkbdc? irq  1  flags 0x1
device  psm0 at atkbdc? irq  12 
device  vga0 at isa?

# syscons is the default console driver, resembling an SCO console
device  sc0 at isa? flags 0x100

# Floating point support - do not disable.
device  npx0 at nexus? port IO_NPX irq  13 

# Serial (COM) ports
device  sio0 at isa? port IO_COM1 flags 0x10 irq  4 
device  sio1 at isa? port IO_COM2 irq  3 
device  sio2 at isa? disable port IO_COM3 irq  5 
device  sio3 at isa? disable port IO_COM4 irq  9 

# Parallel port
device  ppc0 at isa? irq  7 
device  ppbus  # Parallel port bus (required)
device  lpt  # Printer
device  ppi  # Parallel port interface device

# PCI Ethernet NICs.
device  vx  # 3Com 3c590, 3c595 (``Vortex'')

# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
device  miibus  # MII bus support
device  rl  # RealTek  8129 / 8139 
device  xl  # 3Com 3c90x (``Boomerang'', ``Cyclone'')

# Pseudo devices - the number indicates how many units to allocate.
pseudo-device loop  # Network loopback
pseudo-device ether  # Ethernet support
pseudo-device sl  1  # Kernel SLIP
pseudo-device tun  # Packet tunnel.
pseudo-device pty  # Pseudo-ttys (telnet etc)
pseudo-device md  # Memory "disks"
pseudo-device gif  # IPv6 and IPv4 tunneling

# The `bpf' pseudo-device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
pseudo-device bpf  5  #Berkeley packet filter

CPUTYPE=i586/mmx
NO_X=  true # do not compile in XWindows support (e.g. doscmd)
NOGAMES= true # do not build games (games/ subdir)

device sio0 at isa? port IO_COM1 flags 0x10 irq  4 
device sio1 at isa? port IO_COM2 irq  3 
device sio2 at isa? disable port IO_COM3 irq  5 
device sio3 at isa? disable port IO_COM4 irq  9 

device ppc0 at isa? irq  7 
device ppbus # Parallel port bus (required)
device lpt # Printer
device ppi # Parallel port interface device

# PCI Ethernet NICs.
device vx # 3Com 3c590, 3c595 (``Vortex'')
# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
device miibus # MII bus support
device rl # RealTek  8129 / 8139 
device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')

device fdc0 at isa? port IO_FD1 irq  6  drq  2 
device fd0 at fdc0 drive  0 
device fd1 at fdc0 drive  1 

# SCSI peripherals
device  scbus  # SCSI bus (required)
device  da  # Direct Access (disks)
device  sa  # Sequential Access (tape etc)
device  cd  # CD
device  pass  # Passthrough device (direct SCSI access)

machine		i386
cpu		I586_CPU
ident		router_v1
maxusers	 0 
symbols
options		IPFIREWALL
options		IPFIREWALL_VERBOSE
options		IPFIREWALL_VERBOSE_LIMIT= 100 
options		IPFIREWALL_FORWARD
options		IPDIVERT
options		DUMMYNET
options 	INET			#InterNETworking
options 	FFS			#Berkeley Fast Filesystem
options 	FFS_ROOT		#FFS usable as root device [keep this!]
options 	SOFTUPDATES		#Enable FFS soft updates support
options 	UFS_DIRHASH		#Improve performance on big directories
options 	MFS			#Memory Filesystem
options 	MD_ROOT			#MD is a potential root device
options 	MSDOSFS			#MSDOS Filesystem
options 	CD9660			#ISO  9660  Filesystem
options 	CD9660_ROOT		#CD-ROM usable as root, CD9660 required
options 	PROCFS			#Process filesystem
options 	COMPAT_43		#Compatible with BSD  4 . 3  [KEEP THIS!]
options 	SCSI_DELAY= 15000 	#Delay (in ms) before probing SCSI
options 	UCONSOLE		#Allow users to grab the console
options 	USERCONFIG		#boot -c editor
options 	VISUAL_USERCONFIG	#visual boot -c editor
options 	KTRACE			#ktrace( 1 ) support
options 	SYSVSHM			#SYSV-style shared memory
options 	SYSVMSG			#SYSV-style message queues
options 	SYSVSEM			#SYSV-style semaphores
options 	P1003_1B		#Posix P1003_1B real-time extensions
options 	_KPOSIX_PRIORITY_SCHEDULING
options 	ICMP_BANDLIM		#Rate limit bad replies
options 	KBD_INSTALL_CDEV	# install a CDEV entry in /dev
options 	AHC_REG_PRETTY_PRINT	# Print register bitfields in debug
					# output.  Adds ~128k to driver.
options 	AHD_REG_PRETTY_PRINT	# Print register bitfields in debug 
					# output.  Adds ~215k to driver.

device		isa
device		eisa
device		pci

# Floppy drives
device		fdc0	at isa? port IO_FD1 irq  6  drq  2 
device		fd0	at fdc0 drive  0 

# ATA and ATAPI devices
device		ata0	at isa? port IO_WD1 irq  14 
device		ata1	at isa? port IO_WD2 irq  15 
device		ata
device		atadisk			# ATA disk drives
device		atapicd			# ATAPI CDROM drives
options 	ATA_STATIC_ID		#Static device numbering

# SCSI peripherals
device		scbus		# SCSI bus (required)
device		da		# Direct Access (disks)
device		sa		# Sequential Access (tape etc)
device		cd		# CD
device		pass		# Passthrough device (direct SCSI access)

# atkbdc0 controls both the keyboard and the PS/ 2  mouse
device		atkbdc0	at isa? port IO_KBD
device		atkbd0	at atkbdc? irq  1  flags 0x1
device		psm0	at atkbdc? irq  12 
device		vga0	at isa?

# syscons is the default console driver, resembling an SCO console
device		sc0	at isa? flags 0x100

# Floating point support - do not disable.
device		npx0	at nexus? port IO_NPX irq  13 

# Serial (COM) ports
device		sio0	at isa? port IO_COM1 flags 0x10 irq  4 
device		sio1	at isa? port IO_COM2 irq  3 
device		sio2	at isa? disable port IO_COM3 irq  5 
device		sio3	at isa? disable port IO_COM4 irq  9 

# Parallel port
device		ppc0	at isa? irq  7 
device		ppbus		# Parallel port bus (required)
device		lpt		# Printer
device		ppi		# Parallel port interface device

# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
device		miibus		# MII bus support
device		rl		# RealTek  8129 / 8139 
device		xl		# 3Com 3c90x (``Boomerang'', ``Cyclone'')

# WaveLAN/IEEE  802 . 11  wireless NICs. Note: the WaveLAN/IEEE really
# exists only as a PCMCIA device, so there is no ISA attachment needed
# and resources will always be dynamically assigned by the pccard code.
device		wi
# Pseudo devices - the number indicates how many units to allocate.
pseudo-device	loop		# Network loopback
pseudo-device	ether		# Ethernet support
pseudo-device	pty		# Pseudo-ttys (telnet etc)
pseudo-device	md		# Memory "disks"

# The `bpf' pseudo-device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
pseudo-device	bpf	 5 	#Berkeley packet filter