Вот:
Я здесь ttySx в упор не вижу.
Linux version 2.4.26-std-up-alt6 (
builder@mash.office.altlinux.ru) (gcc version 2.96 20000731 (ALT Linux, build 2.96-alt6)) #1 Tue Aug 3 21:45:23 MSD 2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000002fff0000 (usable)
BIOS-e820: 000000002fff0000 - 000000002fff3000 (ACPI NVS)
BIOS-e820: 000000002fff3000 - 0000000030000000 (ACPI data)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
767MB LOWMEM available.
On node 0 totalpages: 196592
zone(0): 4096 pages.
zone(1): 192496 pages.
zone(2): 0 pages.
DMI 2.3 present.
44 structures occupying 1155 bytes.
DMI table at 0x000F0800.
BIOS Vendor: Award Software International, Inc.
BIOS Version: 6.00 PG
BIOS Release: 03/19/2002
System Vendor: VIA Technologies, Inc.
Product Name: VT8363
Version:
Serial Number:
Board Vendor:
Board Name: 8363-686A
Board Version:
ACPI: RSDP (v000 VIA694 ) @ 0x000f7260
ACPI: RSDT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x2fff3000
ACPI: FADT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x2fff3040
ACPI: DSDT (v001 VIA694 AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000
Kernel command line: auto BOOT_IMAGE=linux-up ro root=341
Local APIC disabled by BIOS -- reenabling.
Found and enabled local APIC!
Initializing CPU#0
Detected 704.750 MHz processor.
Console: colour dummy device 80x25
Calibrating delay loop... 1405.74 BogoMIPS
Memory: 774380k/786368k available (1235k kernel code, 11600k reserved, 508k data, 136k init, 0k highmem)
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode cache hash table entries: 65536 (order: 7, 524288 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 65536 (order: 6, 262144 bytes)
Page-cache hash table entries: 262144 (order: 8, 1048576 bytes)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 64K (64 bytes/line)
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 0183fbff c1c7fbff 00000000 00000000
CPU: Common caps: 0183fbff c1c7fbff 00000000 00000000
CPU: AMD Duron(tm) processor stepping 01
Enabling fast FPU save and restore... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 704.7148 MHz.
..... host bus clock speed is 201.3470 MHz.
cpu: 0, clocks: 2013470, slice: 1006735
CPU0<T0:2013456,T1:1006720,D:1,S:1006735,C:2013470>
mtrr: v1.40 (20010327) Richard Gooch (
rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
ACPI: Subsystem revision 20040326
PCI: PCI BIOS revision 2.10 entry at 0xfb400, last bus=1
PCI: Using configuration type 1
Looking for DSDT in initrd ... not found!
ACPI: IRQ11 SCI: Level Trigger.
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: System [ACPI] (supports S0 S1 S4bios S5)
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 10 11 12 14 15) *9
PCI: Probing PCI hardware
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
PCI: Using ACPI for IRQ routing
Applying VIA southbridge workaround.
PCI: Disabling Via external APIC routing
PCI: Via IRQ fixup for 00:07.2, from 9 to 10
PCI: Via IRQ fixup for 00:07.3, from 9 to 10
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
kinoded started
VFS: Disk quotas vdquot_6.5.1
vesafb: framebuffer at 0xe4000000, mapped to 0xf0806000, size 3072k
vesafb: mode is 1024x768x16, linelength=2048, pages=9
vesafb: protected mode interface info at c000:77a0
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
Looking for splash picture.... found (1024x768, 68332 bytes, v2).
Console: switching to colour frame buffer device 106x34
fb0: VESA VGA frame buffer device
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
NET4: Frame Diverter 0.46
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 00:07.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci00:07.1
ide0: BM-DMA at 0xd000-0xd007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xd008-0xd00f, BIOS settings: hdc:pio, hdd:DMA
hda: WDC WD400BB-60DGA0, ATA DISK drive
hdb: SAMSUNG SV0412H, ATA DISK drive
blk: queue c03039e0, I/O limit 4095Mb (mask 0xffffffff)
blk: queue c0303b1c, I/O limit 4095Mb (mask 0xffffffff)
hdd: ASUS CD-S500/A, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 78165360 sectors (40021 MB) w/2048KiB Cache, CHS=4865/255/63, UDMA(100)
hdb: attached ide-disk driver.
hdb: host protected area => 1
hdb: 78242976 sectors (40060 MB) w/2048KiB Cache, CHS=4870/255/63, UDMA(100)
Partition check:
hda: hda1 hda2 hda3
hdb: hdb1 hdb2 < hdb5 hdb6 >
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 166k freed
VFS: Mounted root (romfs filesystem) readonly.
Journalled Block Device driver loaded
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Trying to move old root to /initrd ... failed
Unmounting old root
Trying to free ramdisk memory ... okay
Freeing unused kernel memory: 136k freed
Executing init=/sbin/init
Adding Swap: 248968k swap-space (priority -1)
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,65), internal journal
Real Time Clock Driver v1.10f
SCSI subsystem driver Revision: 1.00
hdd: attached ide-scsi driver.
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: ASUS Model: CD-S500/A Rev: 1.4D
Type: CD-ROM ANSI SCSI revision: 02
ACPI: Power Button (FF) [PWRF]
ACPI: Processor [CPU0] (supports C1 C2, 2 throttling states)
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,70), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
subfs: subfs-2.4 version 0.9.
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 21:58:18 Aug 3 2004
usb-uhci.c: High bandwidth mode enabled
usb-uhci.c: USB UHCI at I/O 0xd400, IRQ 10
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: USB UHCI at I/O 0xd800, IRQ 10
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
usb.c: USB disconnect on device 00:07.2-0 address 1
usb.c: USB bus 1 deregistered
usb.c: USB disconnect on device 00:07.3-0 address 1
usb.c: USB bus 2 deregistered
usb.c: deregistering driver usbdevfs
usb.c: deregistering driver hub
inserting floppy driver for 2.4.26-std-up-alt6
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
sr0: scsi3-mmc drive: 50x/50x cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.12
parport0: PC-style at 0x378 [PCSPP,EPP]
parport_pc: Via 686A parallel port: io=0x378
isapnp: Scanning for PnP cards...
isapnp: Card 'U.S. Robotics 56K FAX INT'
isapnp: 1 Plug & Play card detected total
ne2k-pci.c:v1.02 10/19/2000 D. Becker/P. Gortmaker
http://www.scyld.com/network/ne2k-pci.html
divert: allocating divert_blk for eth0
eth0: RealTek RTL-8029 found at 0xe800, IRQ 11, 52:54:AB:DD:22:99.
divert: freeing divert_blk for eth0
ne2k-pci.c:v1.02 10/19/2000 D. Becker/P. Gortmaker
http://www.scyld.com/network/ne2k-pci.html
divert: allocating divert_blk for eth0
eth0: RealTek RTL-8029 found at 0xe800, IRQ 11, 52:54:AB:DD:22:99.
Via 686a/8233/8235 audio driver 1.9.1-ac3
PCI: Setting latency timer of device 00:07.5 to 64
ac97_codec: AC97 Audio codec, id: ICE17 (ICE1232)
via82cxxx: board #1 at 0xDC00, IRQ 5
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 21:58:18 Aug 3 2004
usb-uhci.c: High bandwidth mode enabled
usb-uhci.c: USB UHCI at I/O 0xd400, IRQ 10
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: USB UHCI at I/O 0xd800, IRQ 10
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 690M
agpgart: Detected Via Apollo Pro KT133 chipset
agpgart: Detected AGP 2.0 mode.
agpgart: AGP aperture is 64M @ 0xe0000000
[drm] Initialized mga 3.1.0 20021029 on minor 0: Matrox G400/G450 (AGP)
slmdm: version 2.7.10 Feb 4 2003 15:18:20 (Smart Link Ltd.).
slmdm: country set is 0xb5 (USA).
Smart Link AMRMO modem.
Looking for splash picture.... found (1024x768, 13684 bytes, v2).
Splash status on console 0 changed to on
Looking for splash picture.... found (1024x768, 13684 bytes, v2).
Splash status on console 1 changed to on
Looking for splash picture.... found (1024x768, 13684 bytes, v2).
Splash status on console 2 changed to on
Looking for splash picture.... found (1024x768, 13684 bytes, v2).
Splash status on console 3 changed to on
Looking for splash picture.... found (1024x768, 13684 bytes, v2).
Splash status on console 4 changed to on
Looking for splash picture.... found (1024x768, 13684 bytes, v2).
Splash status on console 5 changed to on
Looking for splash picture.... found (1024x768, 13684 bytes, v2).
Splash status on console 6 changed to on
Looking for splash picture.... found (1024x768, 13684 bytes, v2).
Splash status on console 7 changed to on
Looking for splash picture.... found (1024x768, 13684 bytes, v2).
Splash status on console 8 changed to on
Looking for splash picture.... found (1024x768, 13684 bytes, v2).
Splash status on console 9 changed to on
Looking for splash picture.... found (1024x768, 13684 bytes, v2).
Splash status on console 10 changed to on
Looking for splash picture.... found (1024x768, 13684 bytes, v2).
Splash status on console 11 changed to on
spurious 8259A interrupt: IRQ7.
via_audio: ignoring drain playback error -512
Да прЕбудет с вами дистрибутив (кроме Касмонафта).
