Добрый день всем!

Прошу откликнуться тех кто работал с IPMItool.
Локально работает, но не могу достучаться через сетевой интерфейс
=======================================
Исходные данные:
- серверная интеловская плата SE7520JR22S
- Имеем RHEL4 update4

# yum -y install OpenIPMI-tools
# modprobe ipmi_devintf
# modprobe ipmi_si

# ipmitool chassis power status
Chassis Power is on

# /usr/share/ipmitool/bmclanconf -c 1 -i eth0
Auto-configuring eth0 (channel 1)
Setting LAN IP Address to 192.168.16.32
Setting LAN Subnet Mask to 255.255.255.0
Setting LAN MAC Address to 00:04:23:b3:59:1a
Setting LAN Default Gateway IP to 192.168.16.177
Setting LAN Default Gateway MAC to 00:13:0a:bb:3c:45
Enabling BMC-generated Gratuitous ARPs
BMC-generated Gratuitous ARP interval: 8.0 seconds
Setting channel authentication capabilities
Enabling channel 1

#ipmitool -I open lan print 1
Set in Progress : Set In Progress
Auth Type Support : NONE MD2 MD5 PASSWORD
Auth Type Enable : Callback : MD2 MD5
: User : MD2 MD5
: Operator : MD2 MD5
: Admin : MD2 MD5
: OEM :
IP Address Source : Static Address
IP Address : 192.168.16.32
Subnet Mask : 255.255.255.0
MAC Address : 00:04:23:b3:59:1a
SNMP Community String :
IP Header : TTL=0x40 Flags=0x40 Precedence=0x00 TOS=0x10
BMC ARP Control : ARP Responses Disabled, Gratuitous ARP Enabled
Gratituous ARP Intrvl : 8.0 seconds
Default Gateway IP : 192.168.16.177
Default Gateway MAC : 00:13:0a:bb:3c:45
Backup Gateway IP : 0.0.0.0
Backup Gateway MAC : 00:00:00:00:00:00
RMCP+ Cipher Suites : None
Cipher Suite Priv Max : XXXXXXXXXXXXXXX
: X=Cipher Suite Unused
: c=CALLBACK
: u=USER
: o=OPERATOR
: a=ADMIN
: O=OEM

#ipmitool -I open sol set set-in-progress set-complete 1
получился set complete

#ipmitool -I open user set password 1 qwertyuiopasdfgh
# ipmitool -I open user list 1
ID Name Callin Link Auth IPMI Msg Channel Priv Limit
1 true false true ADMINISTRATOR
2 root true false false NO ACCESS

#ipmitool -I lan -H 192.168.16.32 -P qwertyuiopasdfgh chassis power status
Activate Session command failed
Error: Unable to establish LAN session
ipmi_lan_send_cmd failed to open intf
Unable to get Chassis Power Status
===========================================

маки eth0 и bmc совпадают

Как еще можно продиагностировать проблему?

Спасибо, Александр

пробовал с другой машины

#ipmitool -I lan -A MD5 -H 192.168.16.33 -P 'qwertyuiopasdfgh' sdr list
Error: Unable to establish LAN session
ipmi_lan_send_cmd failed to open intf
Get Device ID command failed
Unable to open SDR for reading

А у тебя какой дистрибутив линукса?

Ура! Спасибо. Тут мой косяк. Получается MD5 помогло.

Александр.