1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
26.
27.
28.
29.
30.
31.
32.
33.
34.
35.
36.
37.
38.
39.
40.
41.
42.
43.
44.
45.
46.
47.
48.
49.
50.
51.
52.
53.
54.
55.
56.
57.
58.
59.
60.
61.
62.
63.
64.
65.
66.
67.
68.
69.
70.
71.
72.
73.
74.
75.
76.
77.
78.
79.
80.
81.
82.
83.
84.
85.
86.
87.
88.
89.
90.
91.
92.
93.
94.
95.
96.
97.
98.
99.
100.
101.
102.
103.
104.
105.
106.
107.
108.
109.
110.
111.
112.
113.
114.
115.
116.
117.
118.
119.
120.
121.
122.
123.
124.
125.
126.
127.
128.
129.
130.
131.
132.
133.
134.
135.
136.
137.
138.
139.
140.
141.
142.
143.
144.
145.
146.
147.
148.
149.
150.
151.
152.
153.
154.
155.
156.
157.
158.
159.
160.
161.
162.
163.
164.
165.
166.
167.
168.
169.
170.
171.
172.
173.
174.
175.
176.
177.
178.
179.
180.
181.
182.
183.
184.
185.
186.
187.
188.
189.
190.
191.
192.
193.
194.
195.
196.
197.
198.
199.
200.
201.
202.
203.
204.
205.
206.
207.
208.
209.
210.
211.
212.
213.
214.
215.
216.
217.
218.
219.
220.
221.
222.
223.
224.
225.
226.
227.
228.
229.
230.
231.
232.
233.
234.
235.
236.
237.
238.
239.
240.
241.
242.
243.
244.
245.
246.
247.
248.
249.
250.
251.
252.
253.
254.
255.
256.
257.
258.
259.
260.
261.
262.
263.
264.
265.
266.
267.
268.
269.
270.
271.
272.
273.
274.
275.
276.
277.
278.
279.
280.
281.
282.
283.
284.
285.
286.
287.
288.
289.
290.
291.
292.
293.
294.
295.
296.
297.
298.
299.
300.
301.
302.
303.
304.
305.
306.
307.
308.
309.
Jun 4 03:23:09 linux-vlig11 smartd[4245]: Device: /dev/sda [SAT], SMART Prefailure Attribute: 1 Raw_Read_Error_Rate changed from 107 to 108
Jun 4 03:23:09 linux-vlig11 smartd[4245]: Device: /dev/sdb [SAT], SMART Prefailure Attribute: 1 Raw_Read_Error_Rate changed from 108 to 105
Jun 4 03:23:09 linux-vlig11 smartd[4245]: Device: /dev/sdb [SAT], SMART Usage Attribute: 190 Airflow_Temperature_Cel changed from 55 to 52
Jun 4 03:23:09 linux-vlig11 smartd[4245]: Device: /dev/sdb [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 45 to 48
Jun 4 03:23:09 linux-vlig11 smartd[4245]: Device: /dev/sdb [SAT], SMART Usage Attribute: 195 Hardware_ECC_Recovered changed from 54 to 58
Jun 4 03:23:09 linux-vlig11 smartd[4245]: Device: /dev/sdc [SAT], SMART Usage Attribute: 190 Airflow_Temperature_Cel changed from 57 to 56
Jun 4 03:23:09 linux-vlig11 smartd[4245]: Device: /dev/sdc [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 43 to 44
Jun 4 03:43:09 linux-vlig11 -- MARK --
Jun 4 03:53:09 linux-vlig11 smartd[4245]: Device: /dev/sda [SAT], SMART Usage Attribute: 190 Airflow_Temperature_Cel changed from 56 to 55
Jun 4 03:53:09 linux-vlig11 smartd[4245]: Device: /dev/sda [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 44 to 45
Jun 4 03:53:09 linux-vlig11 smartd[4245]: Device: /dev/sda [SAT], SMART Usage Attribute: 195 Hardware_ECC_Recovered changed from 58 to 57
Jun 4 03:53:10 linux-vlig11 smartd[4245]: Device: /dev/sdb [SAT], SMART Prefailure Attribute: 1 Raw_Read_Error_Rate changed from 105 to 108
Jun 4 03:53:10 linux-vlig11 smartd[4245]: Device: /dev/sdb [SAT], SMART Usage Attribute: 190 Airflow_Temperature_Cel changed from 52 to 51
Jun 4 03:53:10 linux-vlig11 smartd[4245]: Device: /dev/sdb [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 48 to 49
Jun 4 03:53:10 linux-vlig11 smartd[4245]: Device: /dev/sdb [SAT], SMART Usage Attribute: 195 Hardware_ECC_Recovered changed from 58 to 60
Jun 4 04:13:10 linux-vlig11 -- MARK --
Jun 4 04:22:09 linux-vlig11 syslog-ng[1304]: Log statistics; dropped='pipe(/dev/xconsole)=0', dropped='pipe(/dev/tty10)=0', processed='center(queued)=2268', processed='center(received)=2169', processed='destination(messages)=2097', processed='destination(mailinfo)=42', processed='destination(mailwarn)=8', processed='destination(localmessages)=0', processed='destination(newserr)=0', processed='destination(mailerr)=0', processed='destination(netmgm)=0', processed='destination(warn)=27', processed='destination(console)=11', processed='destination(null)=8', processed='destination(mail)=50', processed='destination(xconsole)=11', processed='destination(firewall)=0', processed='destination(acpid)=14', processed='destination(newscrit)=0', processed='destination(newsnotice)=0', processed='source(src)=2169'
Jun 4 04:23:09 linux-vlig11 smartd[4245]: Device: /dev/sda [SAT], SMART Prefailure Attribute: 1 Raw_Read_Error_Rate changed from 108 to 110
Jun 4 04:23:09 linux-vlig11 smartd[4245]: Device: /dev/sda [SAT], SMART Usage Attribute: 195 Hardware_ECC_Recovered changed from 57 to 59
Jun 4 04:23:10 linux-vlig11 smartd[4245]: Device: /dev/sdb [SAT], SMART Prefailure Attribute: 1 Raw_Read_Error_Rate changed from 108 to 103
Jun 4 04:43:10 linux-vlig11 -- MARK --
Jun 4 04:53:09 linux-vlig11 smartd[4245]: Device: /dev/sda [SAT], SMART Prefailure Attribute: 1 Raw_Read_Error_Rate changed from 110 to 111
Jun 4 04:53:09 linux-vlig11 smartd[4245]: Device: /dev/sdb [SAT], SMART Prefailure Attribute: 1 Raw_Read_Error_Rate changed from 103 to 106
Jun 4 04:53:09 linux-vlig11 smartd[4245]: Device: /dev/sdb [SAT], SMART Usage Attribute: 190 Airflow_Temperature_Cel changed from 51 to 52
Jun 4 04:53:09 linux-vlig11 smartd[4245]: Device: /dev/sdb [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 49 to 48
Jun 4 04:53:09 linux-vlig11 smartd[4245]: Device: /dev/sdb [SAT], SMART Usage Attribute: 195 Hardware_ECC_Recovered changed from 60 to 58
Jun 4 05:00:01 linux-vlig11 /usr/sbin/cron[7485]: (oracle) CMD (/home/oracle/exp_full_dp.cmd)
Jun 4 05:20:01 linux-vlig11 -- MARK --
Jun 4 05:22:10 linux-vlig11 syslog-ng[1304]: Log statistics; dropped='pipe(/dev/xconsole)=0', dropped='pipe(/dev/tty10)=0', processed='center(queued)=2280', processed='center(received)=2181', processed='destination(messages)=2109', processed='destination(mailinfo)=42', processed='destination(mailwarn)=8', processed='destination(localmessages)=0', processed='destination(newserr)=0', processed='destination(mailerr)=0', processed='destination(netmgm)=0', processed='destination(warn)=27', processed='destination(console)=11', processed='destination(null)=8', processed='destination(mail)=50', processed='destination(xconsole)=11', processed='destination(firewall)=0', processed='destination(acpid)=14', processed='destination(newscrit)=0', processed='destination(newsnotice)=0', processed='source(src)=2181'
Jun 4 05:23:10 linux-vlig11 smartd[4245]: Device: /dev/sda [SAT], SMART Prefailure Attribute: 1 Raw_Read_Error_Rate changed from 111 to 114
Jun 4 05:23:10 linux-vlig11 smartd[4245]: Device: /dev/sda [SAT], SMART Usage Attribute: 190 Airflow_Temperature_Cel changed from 55 to 54
Jun 4 05:23:10 linux-vlig11 smartd[4245]: Device: /dev/sda [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 45 to 46
Jun 4 05:23:10 linux-vlig11 smartd[4245]: Device: /dev/sda [SAT], SMART Usage Attribute: 195 Hardware_ECC_Recovered changed from 59 to 60
Jun 4 05:23:10 linux-vlig11 smartd[4245]: Device: /dev/sdb [SAT], SMART Prefailure Attribute: 1 Raw_Read_Error_Rate changed from 106 to 108
Jun 4 05:23:10 linux-vlig11 smartd[4245]: Device: /dev/sdb [SAT], SMART Usage Attribute: 190 Airflow_Temperature_Cel changed from 52 to 51
Jun 4 05:23:10 linux-vlig11 smartd[4245]: Device: /dev/sdb [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 48 to 49
Jun 4 05:44:04 linux-vlig11 -- MARK --
Jun 4 05:53:09 linux-vlig11 smartd[4245]: Device: /dev/sda [SAT], SMART Prefailure Attribute: 1 Raw_Read_Error_Rate changed from 114 to 117
Jun 4 05:53:09 linux-vlig11 smartd[4245]: Device: /dev/sda [SAT], SMART Usage Attribute: 195 Hardware_ECC_Recovered changed from 60 to 61
Jun 4 05:53:09 linux-vlig11 smartd[4245]: Device: /dev/sdb [SAT], SMART Prefailure Attribute: 1 Raw_Read_Error_Rate changed from 108 to 103
Jun 4 05:53:09 linux-vlig11 smartd[4245]: Device: /dev/sdb [SAT], SMART Usage Attribute: 190 Airflow_Temperature_Cel changed from 51 to 52
Jun 4 05:53:09 linux-vlig11 smartd[4245]: Device: /dev/sdb [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 49 to 48
Jun 4 06:13:09 linux-vlig11 -- MARK --
Jun 4 06:22:10 linux-vlig11 syslog-ng[1304]: Log statistics; dropped='pipe(/dev/xconsole)=0', dropped='pipe(/dev/tty10)=0', processed='center(queued)=2308', processed='center(received)=2202', processed='destination(messages)=2124', processed='destination(mailinfo)=47', processed='destination(mailwarn)=9', processed='destination(localmessages)=0', processed='destination(newserr)=0', processed='destination(mailerr)=0', processed='destination(netmgm)=0', processed='destination(warn)=28', processed='destination(console)=11', processed='destination(null)=8', processed='destination(mail)=56', processed='destination(xconsole)=11', processed='destination(firewall)=0', processed='destination(acpid)=14', processed='destination(newscrit)=0', processed='destination(newsnotice)=0', processed='source(src)=2202'
Jun 4 06:23:09 linux-vlig11 smartd[4245]: Device: /dev/sda [SAT], SMART Prefailure Attribute: 1 Raw_Read_Error_Rate changed from 117 to 105
Jun 4 06:23:09 linux-vlig11 smartd[4245]: Device: /dev/sda [SAT], SMART Usage Attribute: 190 Airflow_Temperature_Cel changed from 54 to 53
Jun 4 06:23:09 linux-vlig11 smartd[4245]: Device: /dev/sda [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 46 to 47
Jun 4 06:23:09 linux-vlig11 smartd[4245]: Device: /dev/sda [SAT], SMART Usage Attribute: 195 Hardware_ECC_Recovered changed from 61 to 60
Jun 4 06:23:09 linux-vlig11 smartd[4245]: Device: /dev/sdb [SAT], SMART Usage Attribute: 190 Airflow_Temperature_Cel changed from 52 to 53
Jun 4 06:23:09 linux-vlig11 smartd[4245]: Device: /dev/sdb [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 48 to 47
Jun 4 06:43:09 linux-vlig11 -- MARK --
Jun 4 06:53:09 linux-vlig11 smartd[4245]: Device: /dev/sda [SAT], SMART Prefailure Attribute: 1 Raw_Read_Error_Rate changed from 105 to 102
Jun 4 06:53:09 linux-vlig11 smartd[4245]: Device: /dev/sda [SAT], SMART Usage Attribute: 190 Airflow_Temperature_Cel changed from 53 to 55
Jun 4 06:53:09 linux-vlig11 smartd[4245]: Device: /dev/sda [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 47 to 45
Jun 4 06:53:09 linux-vlig11 smartd[4245]: Device: /dev/sda [SAT], SMART Usage Attribute: 195 Hardware_ECC_Recovered changed from 60 to 59
Jun 4 07:13:10 linux-vlig11 -- MARK --
Jun 4 07:13:23 linux-vlig11 kernel: [636621.893999] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
Jun 4 07:13:23 linux-vlig11 kernel: [636621.894002] ata3.00: failed command: FLUSH CACHE EXT
Jun 4 07:13:23 linux-vlig11 kernel: [636621.894005] ata3.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 0
Jun 4 07:13:23 linux-vlig11 kernel: [636621.894006] res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
Jun 4 07:13:23 linux-vlig11 kernel: [636621.894007] ata3.00: status: { DRDY }
Jun 4 07:13:23 linux-vlig11 kernel: [636621.894011] ata3: hard resetting link
Jun 4 07:13:29 linux-vlig11 kernel: [636627.252816] ata3: link is slow to respond, please be patient (ready=0)
Jun 4 07:13:33 linux-vlig11 kernel: [636631.899796] ata3: COMRESET failed (errno=-16)
Jun 4 07:13:33 linux-vlig11 kernel: [636631.899805] ata3: hard resetting link
Jun 4 07:13:39 linux-vlig11 kernel: [636637.258588] ata3: link is slow to respond, please be patient (ready=0)
Jun 4 07:13:43 linux-vlig11 kernel: [636641.905557] ata3: COMRESET failed (errno=-16)
Jun 4 07:13:43 linux-vlig11 kernel: [636641.905564] ata3: hard resetting link
Jun 4 07:13:49 linux-vlig11 kernel: [636647.264374] ata3: link is slow to respond, please be patient (ready=0)
Jun 4 07:14:18 linux-vlig11 kernel: [636676.937804] ata3: COMRESET failed (errno=-16)
Jun 4 07:14:18 linux-vlig11 kernel: [636676.937815] ata3: limiting SATA link speed to 1.5 Gbps
Jun 4 07:14:18 linux-vlig11 kernel: [636676.937816] ata3: hard resetting link
Jun 4 07:14:23 linux-vlig11 kernel: [636681.960684] ata3: COMRESET failed (errno=-16)
Jun 4 07:14:23 linux-vlig11 kernel: [636681.960693] ata3: reset failed, giving up
Jun 4 07:14:23 linux-vlig11 kernel: [636681.960695] ata3.00: disabled
Jun 4 07:14:23 linux-vlig11 kernel: [636681.960700] ata3.00: device reported invalid CHS sector 0
Jun 4 07:14:23 linux-vlig11 kernel: [636681.960711] ata3: EH complete
Jun 4 07:14:23 linux-vlig11 kernel: [636681.960754] sd 2:0:0:0: [sdb] Unhandled error code
Jun 4 07:14:23 linux-vlig11 kernel: [636681.960756] sd 2:0:0:0: [sdb] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
Jun 4 07:14:23 linux-vlig11 kernel: [636681.960758] sd 2:0:0:0: [sdb] CDB: Write(10): 2a 00 35 9c ad 50 00 00 20 00
Jun 4 07:14:23 linux-vlig11 kernel: [636681.960763] end_request: I/O error, dev sdb, sector 899460432
Jun 4 07:14:23 linux-vlig11 kernel: [636681.960773] Buffer I/O error on device md0, logical block 112432298
Jun 4 07:14:23 linux-vlig11 kernel: [636681.960774] lost page write due to I/O error on md0
Jun 4 07:14:23 linux-vlig11 kernel: [636681.960780] Buffer I/O error on device md0, logical block 112432299
Jun 4 07:14:23 linux-vlig11 kernel: [636681.960781] lost page write due to I/O error on md0
Jun 4 07:14:23 linux-vlig11 kernel: [636681.960784] Buffer I/O error on device md0, logical block 112432300
Jun 4 07:14:23 linux-vlig11 kernel: [636681.960785] lost page write due to I/O error on md0
Jun 4 07:14:23 linux-vlig11 kernel: [636681.960788] Buffer I/O error on device md0, logical block 112432301
Jun 4 07:14:23 linux-vlig11 kernel: [636681.960789] lost page write due to I/O error on md0
Jun 4 07:14:23 linux-vlig11 kernel: [636681.960798] JBD: Detected IO errors while flushing file data on md0
Jun 4 07:14:23 linux-vlig11 kernel: [636681.960864] sd 2:0:0:0: [sdb] Unhandled error code
Jun 4 07:14:23 linux-vlig11 kernel: [636681.960866] sd 2:0:0:0: [sdb] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
Jun 4 07:14:23 linux-vlig11 kernel: [636681.960868] sd 2:0:0:0: [sdb] CDB: Write(10): 2a 00 35 62 e9 90 00 00 10 00
Jun 4 07:14:23 linux-vlig11 kernel: [636681.960872] end_request: I/O error, dev sdb, sector 895674768
Jun 4 07:14:25 linux-vlig11 kernel: [636681.960875] Buffer I/O error on device md0, logical block 111959090
Jun 4 07:14:25 linux-vlig11 kernel: [636681.960876] lost page write due to I/O error on md0
Jun 4 07:14:25 linux-vlig11 kernel: [636681.960880] Buffer I/O error on device md0, logical block 111959091
Jun 4 07:14:25 linux-vlig11 kernel: [636681.960881] lost page write due to I/O error on md0
Jun 4 07:14:25 linux-vlig11 kernel: [636681.960885] sd 2:0:0:0: [sdb] Unhandled error code
Jun 4 07:14:25 linux-vlig11 kernel: [636681.960886] sd 2:0:0:0: [sdb] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
Jun 4 07:14:25 linux-vlig11 kernel: [636681.960888] sd 2:0:0:0: [sdb] CDB: Write(10): 2a 00 1d 19 58 e8 00 00 18 00
Jun 4 07:14:25 linux-vlig11 kernel: [636681.960891] end_request: I/O error, dev sdb, sector 488200424
Jun 4 07:14:25 linux-vlig11 kernel: [636681.960901] Aborting journal on device md0.
Jun 4 07:14:25 linux-vlig11 kernel: [636681.960910] sd 2:0:0:0: [sdb] Unhandled error code
Jun 4 07:14:26 linux-vlig11 kernel: [636681.960912] sd 2:0:0:0: [sdb] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
Jun 4 07:14:26 linux-vlig11 kernel: [636681.960913] sd 2:0:0:0: [sdb] CDB: Write(10): 2a 00 1d 18 18 10 00 00 08 00
Jun 4 07:14:26 linux-vlig11 kernel: [636681.960917] end_request: I/O error, dev sdb, sector 488118288
Jun 4 07:14:26 linux-vlig11 kernel: [636681.960918] Buffer I/O error on device md0, logical block 61014530
Jun 4 07:14:26 linux-vlig11 kernel: [636681.960919] lost page write due to I/O error on md0
Jun 4 07:14:26 linux-vlig11 kernel: [636681.960924] JBD: I/O error detected when updating journal superblock for md0.
Jun 4 07:14:26 linux-vlig11 kernel: [636681.961031] EXT3-fs (md0): error: ext3_journal_start_sb: Detected aborted journal
Jun 4 07:14:26 linux-vlig11 kernel: [636681.961033] EXT3-fs (md0): error: remounting filesystem read-only
Jun 4 07:14:26 linux-vlig11 kernel: [636681.968687] sd 2:0:0:0: [sdb] Unhandled error code
Jun 4 07:14:26 linux-vlig11 kernel: [636681.968689] sd 2:0:0:0: [sdb] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
Jun 4 07:14:26 linux-vlig11 kernel: [636681.968691] sd 2:0:0:0: [sdb] CDB: Read(10): 28 00 35 cb 06 58 00 00 10 00
Jun 4 07:14:26 linux-vlig11 kernel: [636681.968695] end_request: I/O error, dev sdb, sector 902497880
Jun 4 07:14:26 linux-vlig11 kernel: [636681.968731] sd 2:0:0:0: [sdb] Unhandled error code
Jun 4 07:14:26 linux-vlig11 kernel: [636681.968732] sd 2:0:0:0: [sdb] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
Jun 4 07:14:26 linux-vlig11 kernel: [636681.968734] sd 2:0:0:0: [sdb] CDB: Read(10): 28 00 35 cb 06 58 00 00 08 00
Jun 4 07:14:26 linux-vlig11 kernel: [636681.968739] end_request: I/O error, dev sdb, sector 902497880
Jun 4 07:14:26 linux-vlig11 kernel: [636681.976693] sd 2:0:0:0: [sdb] Unhandled error code
Jun 4 07:14:26 linux-vlig11 kernel: [636681.976696] sd 2:0:0:0: [sdb] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
Jun 4 07:14:26 linux-vlig11 kernel: [636681.976698] sd 2:0:0:0: [sdb] CDB: Read(10): 28 00 36 c0 d8 40 00 00 10 00
Jun 4 07:14:26 linux-vlig11 kernel: [636681.976702] end_request: I/O error, dev sdb, sector 918607936
Jun 4 07:14:27 linux-vlig11 kernel: [636681.976711] sd 2:0:0:0: [sdb] Unhandled error code
Jun 4 07:14:27 linux-vlig11 kernel: [636681.976712] sd 2:0:0:0: [sdb] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
Jun 4 07:14:27 linux-vlig11 kernel: [636681.976714] sd 2:0:0:0: [sdb] CDB: Read(10): 28 00 36 44 29 38 00 00 10 00
Jun 4 07:14:27 linux-vlig11 kernel: [636681.976718] end_request: I/O error, dev sdb, sector 910436664
Jun 4 07:14:27 linux-vlig11 kernel: [636681.976722] sd 2:0:0:0: [sdb] Unhandled error code
Jun 4 07:14:27 linux-vlig11 kernel: [636681.976723] sd 2:0:0:0: [sdb] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
Jun 4 07:14:27 linux-vlig11 kernel: [636681.976724] sd 2:0:0:0: [sdb] CDB: Read(10): 28 00 35 e3 f5 48 00 00 10 00
Jun 4 07:14:27 linux-vlig11 kernel: [636681.976728] end_request: I/O error, dev sdb, sector 904131912
Jun 4 07:14:27 linux-vlig11 kernel: [636681.976739] sd 2:0:0:0: [sdb] Unhandled error code
Jun 4 07:14:27 linux-vlig11 kernel: [636681.976740] sd 2:0:0:0: [sdb] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
Jun 4 07:14:27 linux-vlig11 kernel: [636681.976742] sd 2:0:0:0: [sdb] CDB: Read(10): 28 00 38 18 ab 60 00 00 08 00
Jun 4 07:14:27 linux-vlig11 kernel: [636681.976745] end_request: I/O error, dev sdb, sector 941140832
Jun 4 07:14:27 linux-vlig11 kernel: [636681.976752] sd 2:0:0:0: [sdb] Unhandled error code
Jun 4 07:14:27 linux-vlig11 kernel: [636681.976753] sd 2:0:0:0: [sdb] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
Jun 4 07:14:27 linux-vlig11 kernel: [636681.976754] sd 2:0:0:0: [sdb] CDB:
Jun 4 07:14:27 linux-vlig11 kernel: [636681.976756] sd 2:0:0:0: [sdb] Unhandled error code
Jun 4 07:14:27 linux-vlig11 kernel: [636681.976758] sd 2:0:0:0: [sdb] Unhandled error code
...
Jun 4 07:56:07 linux-vlig11 kernel: [639179.291903] sd 2:0:0:0: [sdb] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
Jun 4 07:56:07 linux-vlig11 kernel: [639179.291905] sd 2:0:0:0: [sdb] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00
Jun 4 07:56:07 linux-vlig11 kernel: [639179.291909] end_request: I/O error, dev sdb, sector 0
Jun 4 07:56:07 linux-vlig11 kernel: [639179.292376] sd 2:0:0:0: [sdb] Unhandled error code
Jun 4 07:56:07 linux-vlig11 kernel: [639179.292377] sd 2:0:0:0: [sdb] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
Jun 4 07:56:07 linux-vlig11 kernel: [639179.292379] sd 2:0:0:0: [sdb] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00
Jun 4 07:56:07 linux-vlig11 kernel: [639179.292382] end_request: I/O error, dev sdb, sector 0
Jun 4 08:00:37 linux-vlig11 pm-profiler: Power Button pressed, executing /sbin/shutdown -h now
Jun 4 08:00:37 linux-vlig11 shutdown[15724]: shutting down for system halt
Jun 4 08:00:37 linux-vlig11 init: Switching to runlevel: 0
Jun 4 08:00:37 linux-vlig11 smartd[4245]: smartd received signal 15: Terminated
Jun 4 08:00:37 linux-vlig11 smartd[4245]: Device: /dev/sda [SAT], state written to /var/lib/smartmontools/smartd.ST500DM002_1BD142-W2AFZ0ZS.ata.state
Jun 4 08:00:37 linux-vlig11 smartd[4245]: Device: /dev/sdb [SAT], state written to /var/lib/smartmontools/smartd.ST500DM002_1BD142-Z3TB29D4.ata.state
Jun 4 08:00:37 linux-vlig11 smartd[4245]: Device: /dev/sdc [SAT], state written to /var/lib/smartmontools/smartd.ST500DM002_1BD142-W2AFYX1T.ata.state
Jun 4 08:00:37 linux-vlig11 smartd[4245]: smartd is exiting (exit status 0)
Jun 4 08:00:38 linux-vlig11 sshd[2801]: Received signal 15; terminating.
Jun 4 08:00:38 linux-vlig11 xinetd[4264]: Exiting...
Jun 4 08:02:19 linux-vlig11 syslog-ng[1326]: syslog-ng starting up; version='2.0.9'
Jun 4 08:02:19 linux-vlig11 firmware.sh[1354]: Cannot find firmware file 'intel-ucode/06-2a-07'
Jun 4 08:02:19 linux-vlig11 firmware.sh[1360]: Cannot find firmware file 'intel-ucode/06-2a-07'
Jun 4 08:02:19 linux-vlig11 firmware.sh[1371]: Cannot find firmware file 'intel-ucode/06-2a-07'
Jun 4 08:02:19 linux-vlig11 firmware.sh[1382]: Cannot find firmware file 'intel-ucode/06-2a-07'
Jun 4 08:02:21 linux-vlig11 ifup: lo
Jun 4 08:02:21 linux-vlig11 ifup: lo
Jun 4 08:02:21 linux-vlig11 ifup: IP address: 127.0.0.1/8
Jun 4 08:02:21 linux-vlig11 ifup:
Jun 4 08:02:21 linux-vlig11 ifup:
Jun 4 08:02:21 linux-vlig11 ifup: IP address: 127.0.0.2/8
Jun 4 08:02:21 linux-vlig11 ifup:
Jun 4 08:02:21 linux-vlig11 ifup: eth0 device: Intel Corporation 82579LM Gigabit Network Con
Jun 4 08:02:21 linux-vlig11 ifup: eth0
Jun 4 08:02:21 linux-vlig11 ifup: IP address: /16
Jun 4 08:02:21 linux-vlig11 ifup:
Jun 4 08:02:22 linux-vlig11 SuSEfirewall2: SuSEfirewall2 not active
Jun 4 08:02:22 linux-vlig11 auditd[2162]: Started dispatcher: /sbin/audispd pid: 2164
Jun 4 08:02:22 linux-vlig11 audispd: priority_boost_parser called with: 4
Jun 4 08:02:22 linux-vlig11 audispd: af_unix plugin initialized
Jun 4 08:02:22 linux-vlig11 audispd: audispd initialized with q_depth=80 and 1 active plugins
Jun 4 08:02:22 linux-vlig11 auditd[2162]: Init complete, auditd 1.7.7 listening for events (startup state disable)
Jun 4 08:02:22 linux-vlig11 haveged: haveged starting up
Jun 4 08:02:22 linux-vlig11 haveged: arch: x86 vendor: intel generic: 0 i_cache: 32 d_cache: 32 loop_idx: 30 loop_idxmax: 40 loop_sz: 31836 loop_szmax: 124334 etime: 9934 havege_ndpt 0
Jun 4 08:02:22 linux-vlig11 rpcbind: cannot create socket for udp6
Jun 4 08:02:22 linux-vlig11 rpcbind: cannot create socket for tcp6
Jun 4 08:02:23 linux-vlig11 webmin[2262]: Webmin starting
Jun 4 08:02:24 linux-vlig11 kernel: klogd 1.4.1, log source = /proc/kmsg started.
Jun 4 08:02:24 linux-vlig11 kernel: [ 100.448239] microcode: CPU0 sig=0x206a7, pf=0x2, revision=0x28
Jun 4 08:02:24 linux-vlig11 kernel: [ 100.489107] microcode: CPU1 sig=0x206a7, pf=0x2, revision=0x28
Jun 4 08:02:24 linux-vlig11 kernel: [ 100.491679] microcode: CPU2 sig=0x206a7, pf=0x2, revision=0x28
Jun 4 08:02:24 linux-vlig11 kernel: [ 100.494029] microcode: CPU3 sig=0x206a7, pf=0x2, revision=0x28
Jun 4 08:02:24 linux-vlig11 kernel: [ 100.496448] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>;, Peter Oruba
Jun 4 08:02:24 linux-vlig11 kernel: [ 102.550805] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
Jun 4 08:02:24 linux-vlig11 kernel: [ 102.606666] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
Jun 4 08:02:24 linux-vlig11 kernel: [ 103.665815] auditd (2162): /proc/2162/oom_adj is deprecated, please use /proc/2162/oom_score_adj instead.
Jun 4 08:02:24 linux-vlig11 kernel: [ 104.144202] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
Jun 4 08:02:24 linux-vlig11 kernel: [ 104.144207] e1000e 0000:00:19.0: eth0: 10/100 speed: disabling TSO
Jun 4 08:02:24 linux-vlig11 kernel: [ 104.557992] vboxdrv: Found 4 processor cores.
Jun 4 08:02:24 linux-vlig11 kernel: [ 104.558260] vboxdrv: fAsync=0 offMin=0x199 offMax=0x1ba5a
Jun 4 08:02:24 linux-vlig11 kernel: [ 104.558361] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
Jun 4 08:02:24 linux-vlig11 kernel: [ 104.558363] vboxdrv: Successfully loaded version 4.2.10 (interface 0x001a0004).
Jun 4 08:02:24 linux-vlig11 kernel: [ 104.812534] vboxpci: IOMMU not found (not registered)
Jun 4 08:02:27 linux-vlig11 sm-notify[2277]: Version 1.2.3 starting
Jun 4 08:02:27 linux-vlig11 su: (to administrator) root on none
Jun 4 08:02:31 linux-vlig11 kernel: [ 112.429009] BIOS EDD facility v0.16 2004-Jun-25, 4 devices found
Jun 4 08:02:32 linux-vlig11 mcelog: mcelog read: No such device
Jun 4 08:02:34 linux-vlig11 sshd[2923]: Server listening on 0.0.0.0 port 22.
Jun 4 08:02:34 linux-vlig11 kernel: [ 115.936030] warning: `VBoxHeadless' uses 32-bit capabilities (legacy support in use)
Jun 4 08:02:34 linux-vlig11 su: (to oracle) root on /dev/console
Jun 4 08:02:36 linux-vlig11 kernel: [ 118.093946] device eth0 entered promiscuous mode
Jun 4 08:02:58 linux-vlig11 su: (to oracle) root on /dev/console
Jun 4 08:02:58 linux-vlig11 su: (to oracle) root on /dev/console
Jun 4 08:10:37 linux-vlig11 su: (to oracle) root on /dev/console
Jun 4 08:10:37 linux-vlig11 su: (to oracle) root on /dev/console
Jun 4 08:10:44 linux-vlig11 logger: /etc/init.d/xdm: No changes for /etc/X11/xdm/Xservers
Jun 4 08:10:44 linux-vlig11 logger: /etc/init.d/xdm: No changes for /etc/X11/xdm/xdm-config
Jun 4 08:10:45 linux-vlig11 gdm[4780]: WARNING: socket: ¦б¦¦¦-¦¦¦¦TБTВ¦-¦- ¦-¦+TА¦¦TБ¦-¦- ¦-¦¦ ¦¬¦-¦+¦+¦¦TА¦¦¦¬¦-¦-¦¦TВTБTП ¦¬TА¦-TВ¦-¦¦¦-¦¬¦-¦-
Jun 4 08:10:45 linux-vlig11 /usr/sbin/cron[4815]: (CRON) STARTUP (V5.0)
Jun 4 08:10:45 linux-vlig11 smartd[4842]: smartd 5.39 2008-10-24 22:33 [x86_64-suse-linux-gnu] (openSUSE RPM) Copyright (C) 2002-8 by Bruce Allen, http://smartmontools.sourceforge.net
Jun 4 08:10:45 linux-vlig11 smartd[4842]: Opened configuration file /etc/smartd.conf
Jun 4 08:10:45 linux-vlig11 smartd[4842]: Drive: DEVICESCAN, implied '-a' Directive on line 26 of file /etc/smartd.conf
Jun 4 08:10:45 linux-vlig11 smartd[4842]: Configuration file /etc/smartd.conf was parsed, found DEVICESCAN, scanning devices
Jun 4 08:10:45 linux-vlig11 smartd[4842]: Device: /dev/sda, type changed from 'scsi' to 'sat'
Jun 4 08:10:45 linux-vlig11 smartd[4842]: Device: /dev/sda [SAT], opened
Jun 4 08:10:45 linux-vlig11 smartd[4842]: Device: /dev/sda [SAT], not found in smartd database.
Jun 4 08:10:46 linux-vlig11 smartd[4842]: Device: /dev/sda [SAT], is SMART capable. Adding to "monitor" list.
Jun 4 08:10:46 linux-vlig11 smartd[4842]: Device: /dev/sda [SAT], state read from /var/lib/smartmontools/smartd.ST500DM002_1BD142-W2AFZ0ZS.ata.state
Jun 4 08:10:46 linux-vlig11 smartd[4842]: Device: /dev/sdb, type changed from 'scsi' to 'sat'
Jun 4 08:10:46 linux-vlig11 smartd[4842]: Device: /dev/sdb [SAT], opened
Jun 4 08:10:46 linux-vlig11 smartd[4842]: Device: /dev/sdb [SAT], not found in smartd database.
Jun 4 08:10:46 linux-vlig11 smartd[4842]: Device: /dev/sdb [SAT], is SMART capable. Adding to "monitor" list.
Jun 4 08:10:46 linux-vlig11 smartd[4842]: Device: /dev/sdb [SAT], state read from /var/lib/smartmontools/smartd.ST500DM002_1BD142-W2AG3KS3.ata.state
Jun 4 08:10:47 linux-vlig11 smartd[4842]: Device: /dev/sdc, type changed from 'scsi' to 'sat'
Jun 4 08:10:47 linux-vlig11 smartd[4842]: Device: /dev/sdc [SAT], opened
Jun 4 08:10:47 linux-vlig11 smartd[4842]: Device: /dev/sdc [SAT], not found in smartd database.
Jun 4 08:10:47 linux-vlig11 gdm[4780]: WARNING: GdmDisplay: display lasted 2,304549 seconds
Jun 4 08:10:47 linux-vlig11 gdm[4780]: WARNING: GdmDisplay: display lasted 0,391736 seconds
Jun 4 08:10:48 linux-vlig11 smartd[4842]: Device: /dev/sdc [SAT], is SMART capable. Adding to "monitor" list.
Jun 4 08:10:48 linux-vlig11 smartd[4842]: Device: /dev/sdc [SAT], state read from /var/lib/smartmontools/smartd.ST500DM002_1BD142-Z3TB29D4.ata.state
Jun 4 08:10:48 linux-vlig11 smartd[4842]: Device: /dev/sdd, type changed from 'scsi' to 'sat'
Jun 4 08:10:48 linux-vlig11 smartd[4842]: Device: /dev/sdd [SAT], opened
Jun 4 08:10:48 linux-vlig11 gdm[4780]: WARNING: GdmDisplay: display lasted 0,329337 seconds
Jun 4 08:10:48 linux-vlig11 smartd[4842]: Device: /dev/sdd [SAT], not found in smartd database.
Jun 4 08:10:48 linux-vlig11 smartd[4842]: Device: /dev/sdd [SAT], is SMART capable. Adding to "monitor" list.
Jun 4 08:10:48 linux-vlig11 smartd[4842]: Device: /dev/sdd [SAT], state read from /var/lib/smartmontools/smartd.ST500DM002_1BD142-W2AFYX1T.ata.state
Jun 4 08:10:48 linux-vlig11 smartd[4842]: Monitoring 4 ATA and 0 SCSI devices
Jun 4 08:10:48 linux-vlig11 smartd[4842]: Device: /dev/sda [SAT], SMART Prefailure Attribute: 1 Raw_Read_Error_Rate changed from 108 to 105
Jun 4 08:10:48 linux-vlig11 smartd[4842]: Device: /dev/sda [SAT], SMART Usage Attribute: 195 Hardware_ECC_Recovered changed from 59 to 57
Jun 4 08:10:48 linux-vlig11 gdm[4780]: WARNING: GdmDisplay: display lasted 0,324594 seconds
Jun 4 08:10:48 linux-vlig11 smartd[4842]: Device: /dev/sdb [SAT], SMART Prefailure Attribute: 1 Raw_Read_Error_Rate changed from 102 to 105
Jun 4 08:10:48 linux-vlig11 smartd[4842]: Device: /dev/sdb [SAT], SMART Usage Attribute: 190 Airflow_Temperature_Cel changed from 53 to 57
Jun 4 08:10:48 linux-vlig11 smartd[4842]: Device: /dev/sdb [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 47 to 43
Jun 4 08:10:48 linux-vlig11 smartd[4842]: Device: /dev/sdb [SAT], SMART Usage Attribute: 195 Hardware_ECC_Recovered changed from 52 to 54
Jun 4 08:10:48 linux-vlig11 gdm[4780]: WARNING: GdmDisplay: display lasted 0,422955 seconds
Jun 4 08:10:49 linux-vlig11 smartd[4842]: Device: /dev/sdc [SAT], SMART Prefailure Attribute: 1 Raw_Read_Error_Rate changed from 103 to 101
Jun 4 08:10:49 linux-vlig11 smartd[4842]: Device: /dev/sdc [SAT], SMART Usage Attribute: 190 Airflow_Temperature_Cel changed from 53 to 55
Jun 4 08:10:49 linux-vlig11 smartd[4842]: Device: /dev/sdc [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 47 to 45
Jun 4 08:10:49 linux-vlig11 smartd[4842]: Device: /dev/sdc [SAT], SMART Usage Attribute: 195 Hardware_ECC_Recovered changed from 58 to 59
Jun 4 08:10:49 linux-vlig11 gdm[4780]: WARNING: GdmDisplay: display lasted 0,319184 seconds
Jun 4 08:10:49 linux-vlig11 gdm[4780]: WARNING: GdmLocalDisplayFactory: maximum number of X display failures reached: check X server log for errors
Jun 4 08:10:49 linux-vlig11 smartd[4842]: Device: /dev/sdd [SAT], SMART Usage Attribute: 190 Airflow_Temperature_Cel changed from 58 to 57
Jun 4 08:10:49 linux-vlig11 smartd[4842]: Device: /dev/sdd [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 42 to 43
Jun 4 08:10:49 linux-vlig11 smartd[4842]: Device: /dev/sda [SAT], state written to /var/lib/smartmontools/smartd.ST500DM002_1BD142-W2AFZ0ZS.ata.state
Jun 4 08:10:49 linux-vlig11 smartd[4842]: Device: /dev/sdb [SAT], state written to /var/lib/smartmontools/smartd.ST500DM002_1BD142-W2AG3KS3.ata.state
Jun 4 08:10:49 linux-vlig11 smartd[4842]: Device: /dev/sdc [SAT], state written to /var/lib/smartmontools/smartd.ST500DM002_1BD142-Z3TB29D4.ata.state
Jun 4 08:10:49 linux-vlig11 smartd[4842]: Device: /dev/sdd [SAT], state written to /var/lib/smartmontools/smartd.ST500DM002_1BD142-W2AFYX1T.ata.state
Jun 4 08:10:49 linux-vlig11 smartd[4926]: smartd has fork()ed into background mode. New PID=4926.
Jun 4 08:10:49 linux-vlig11 xinetd[4949]: Reading included configuration file: /etc/xinetd.d/chargen [file=/etc/xinetd.conf] [line=26]
Jun 4 08:10:49 linux-vlig11 xinetd[4949]: Reading included configuration file: /etc/xinetd.d/chargen-udp [file=/etc/xinetd.d/chargen-udp] [line=14]
Jun 4 08:10:49 linux-vlig11 xinetd[4949]: Reading included configuration file: /etc/xinetd.d/cups-lpd [file=/etc/xinetd.d/cups-lpd] [line=15]
Jun 4 08:10:49 linux-vlig11 xinetd[4949]: Reading included configuration file: /etc/xinetd.d/cvs [file=/etc/xinetd.d/cvs] [line=11]
Jun 4 08:10:49 linux-vlig11 xinetd[4949]: Reading included configuration file: /etc/xinetd.d/daytime [file=/etc/xinetd.d/daytime] [line=16]
Jun 4 08:10:49 linux-vlig11 xinetd[4949]: Reading included configuration file: /etc/xinetd.d/daytime-udp [file=/etc/xinetd.d/daytime-udp] [line=14]
Jun 4 08:10:49 linux-vlig11 xinetd[4949]: Reading included configuration file: /etc/xinetd.d/discard [file=/etc/xinetd.d/discard] [line=15]
Jun 4 08:10:49 linux-vlig11 xinetd[4949]: Reading included configuration file: /etc/xinetd.d/discard-udp [file=/etc/xinetd.d/discard-udp] [line=14]
Jun 4 08:10:49 linux-vlig11 xinetd[4949]: Reading included configuration file: /etc/xinetd.d/echo [file=/etc/xinetd.d/echo] [line=15]
Jun 4 08:10:49 linux-vlig11 xinetd[4949]: Reading included configuration file: /etc/xinetd.d/echo-udp [file=/etc/xinetd.d/echo-udp] [line=14]
Jun 4 08:10:49 linux-vlig11 xinetd[4949]: Reading included configuration file: /etc/xinetd.d/netstat [file=/etc/xinetd.d/netstat] [line=15]
Jun 4 08:10:49 linux-vlig11 xinetd[4949]: Reading included configuration file: /etc/xinetd.d/pure-ftpd [file=/etc/xinetd.d/pure-ftpd] [line=16]
Jun 4 08:10:49 linux-vlig11 xinetd[4949]: Reading included configuration file: /etc/xinetd.d/rsync [file=/etc/xinetd.d/rsync] [line=21]
Jun 4 08:10:49 linux-vlig11 xinetd[4949]: Reading included configuration file: /etc/xinetd.d/servers [file=/etc/xinetd.d/servers] [line=12]
Jun 4 08:10:49 linux-vlig11 xinetd[4949]: Reading included configuration file: /etc/xinetd.d/services [file=/etc/xinetd.d/services] [line=14]
Jun 4 08:10:49 linux-vlig11 xinetd[4949]: Reading included configuration file: /etc/xinetd.d/swat [file=/etc/xinetd.d/swat] [line=14]
Jun 4 08:10:49 linux-vlig11 xinetd[4949]: Reading included configuration file: /etc/xinetd.d/systat [file=/etc/xinetd.d/systat] [line=12]
Jun 4 08:10:49 linux-vlig11 xinetd[4949]: Reading included configuration file: /etc/xinetd.d/tftp [file=/etc/xinetd.d/tftp] [line=17]
Jun 4 08:10:49 linux-vlig11 xinetd[4949]: Reading included configuration file: /etc/xinetd.d/time [file=/etc/xinetd.d/time] [line=15]
Jun 4 08:10:49 linux-vlig11 xinetd[4949]: Reading included configuration file: /etc/xinetd.d/time-udp [file=/etc/xinetd.d/time-udp] [line=15]
Jun 4 08:10:49 linux-vlig11 xinetd[4949]: Reading included configuration file: /etc/xinetd.d/vnc [file=/etc/xinetd.d/vnc] [line=15]
Jun 4 08:10:49 linux-vlig11 xinetd[4949]: xinetd Version 2.3.14 started with libwrap loadavg options compiled in.
Jun 4 08:10:49 linux-vlig11 xinetd[4949]: Started working: 2 available services
Jun 4 08:10:50 linux-vlig11 kernel: [ 611.948867] bootsplash: status on console 0 changed to on
Jun 4 08:30:51 linux-vlig11 -- MARK --
Jun 4 08:36:22 linux-vlig11 gdm-simple-greeter[6260]: GLib-GObject-CRITICAL: g_param_spec_flags: assertion `G_TYPE_IS_FLAGS (flags_type)' failed
Jun 4 08:36:22 linux-vlig11 gdm-simple-greeter[6260]: GLib-GObject-CRITICAL: g_object_class_install_property: assertion `G_IS_PARAM_SPEC (pspec)' failed
Jun 4 08:36:26 linux-vlig11 gdm-session-worker[6266]: WARNING: gdm_session_settings_load: lang = (null)
Jun 4 08:36:30 linux-vlig11 checkproc: checkproc: can not get session id for process 14914!
Jun 4 08:36:40 linux-vlig11 pulseaudio[6446]: pid.c: Stale PID file, overwriting.
Jun 4 08:39:04 linux-vlig11 kernel: [ 2305.516343] Uniform Multi-Platform E-IDE driver
Jun 4 08:39:04 linux-vlig11 kernel: [ 2305.516921] ide-cd driver 5.00
Jun 4 08:39:05 linux-vlig11 kernel: [ 2305.853158] st: Version 20101219, fixed bufsize 32768, s/g segs 256
Jun 4 08:40:50 linux-vlig11 smartd[4926]: Device: /dev/sda [SAT], SMART Prefailure Attribute: 1 Raw_Read_Error_Rate changed from 105 to 108
Jun 4 08:40:50 linux-vlig11 smartd[4926]: Device: /dev/sda [SAT], SMART Usage Attribute: 195 Hardware_ECC_Recovered changed from 57 to 55
Jun 4 08:40:51 linux-vlig11 smartd[4926]: Device: /dev/sdc [SAT], SMART Prefailure Attribute: 1 Raw_Read_Error_Rate changed from 101 to 111
Jun 4 08:40:51 linux-vlig11 smartd[4926]: Device: /dev/sdc [SAT], SMART Usage Attribute: 190 Airflow_Temperature_Cel changed from 55 to 52
Jun 4 08:40:51 linux-vlig11 smartd[4926]: Device: /dev/sdc [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 45 to 48
Jun 4 08:40:51 linux-vlig11 smartd[4926]: Device: /dev/sdc [SAT], SMART Usage Attribute: 195 Hardware_ECC_Recovered changed from 59 to 58
Jun 4 09:00:51 linux-vlig11 -- MARK --
